Jump to content
SAU Community

Dr-30 Rs Turbo Stickers For Side

benny_blanco
 Share

Recommended Posts

benny_blanco Proficient

benny_blanco

Posted
Posted

Im trying to get hold of some RS-Turbo stickers for the side of my DR30.

So far I found some on the Jenesis webstie www.r30.co.jp but cos i cant understand Japanese I havnt had any luck ordering any. I tried emailing them a couple of months back but never got a reply.

can anyone help me out?? Is there any site in English preferably Australia / South Australia.

I have allready tried JMS, Jaustech, Adelaide Jap imports to no avail.

also does anyone have the paint code for the bottom 1/2 of the car, mine was painted black in the respray, I hear its really ment to be a real dark metalic blue.

cheers

-Glenn

Link to comment
https://www.sau.com.au/forums/topic/183007-dr-30-rs-turbo-stickers-for-side/
Share on other sites
Ghostrider Grand Master

Ghostrider

Posted
Posted

Make your own. Any sign maker can do this. Take a picture of the signs you want or a scan from what you have from Jenesis and get them to make it.

As for colour coding if your car is red, it's 013. If it's 2 tone the only factory reds were 059, made up with 013 Red over 028 Grey and otherwise 013 Red over 826 Black, according to my JDM Brochures.

Do you have a colour code on the compliance/manufacturing plates?

0R10N Explorer

0R10N

Posted
Posted

I took some high-res photos of my decals for ChokudoriDR30 last year, if you decide to go the signmaker route I'll see if I can dig them up for you.

Jenesis are rather iffy about sending stuff overseas. Not sure if it's the language barrier or what.

benny_blanco Proficient

benny_blanco

Posted
  • Author
Posted
Make your own. Any sign maker can do this. Take a picture of the signs you want or a scan from what you have from Jenesis and get them to make it.

As for colour coding if your car is red, it's 013. If it's 2 tone the only factory reds were 059, made up with 013 Red over 028 Grey and otherwise 013 Red over 826 Black, according to my JDM Brochures.

Do you have a colour code on the compliance/manufacturing plates?

Its White over black atm.... Car came all white from the Factory so doubt it would have any colour codes on the plates. heard from a few people it should be a real dark metalic blue for the white ones not black? so thats what I came to beleive.

I took some high-res photos of my decals for ChokudoriDR30 last year, if you decide to go the signmaker route I'll see if I can dig them up for you.

Jenesis are rather iffy about sending stuff overseas. Not sure if it's the language barrier or what.

looks like I might have to go that option. if you can find them it would be sweet.

benny_blanco Proficient

benny_blanco

Posted
  • Author
Posted
PM me if you're set on getting the Jenisis ones I know a dood who can prob hook you up.

And yes my Iron mask coupe was metallic blue on the bottom 1/2... maybe an affect of fading with age, but it def wasn't black.

Will see how it goes, If its gonna be abit of a headf**k with Genesis I guess I would only be looking @ them there If i decide on buying the 260kph gauge aswell. bonus is it would go from 85,000kms to 0kms ;)

meter.gif

0R10N Explorer

0R10N

Posted
Posted

Found them. Enjoy

http://www.tx3nz.com/img/dr30/decal-001.jpg

http://www.tx3nz.com/img/dr30/decal-002.jpg

http://www.tx3nz.com/img/dr30/decal-003.jpg

(about 1.5MB each, unresized from 3264 x 2448)

Boof Mentor

Boof

Posted
Posted
Im trying to get hold of some RS-Turbo stickers for the side of my DR30.

So far I found some on the Jenesis webstie www.r30.co.jp but cos i cant understand Japanese I havnt had any luck ordering any. I tried emailing them a couple of months back but never got a reply.

can anyone help me out?? Is there any site in English preferably Australia / South Australia.

I have allready tried JMS, Jaustech, Adelaide Jap imports to no avail.

also does anyone have the paint code for the bottom 1/2 of the car, mine was painted black in the respray, I hear its really ment to be a real dark metalic blue.

cheers

-Glenn

Glenn..

Your right, the car was all white to start with, Crimmo had it sprayed white or black

The black isnt black, its black with a blue pearl through it! I could probably get my paint codes from mine as mine was white over black from factory!

Have you tried Datsport?? I enquired about some down there before and they said they could probably get them, worth a try!

benny_blanco Proficient

benny_blanco

Posted
  • Author
Posted

Nah I havnt, a guy I spoke to with a couple of DR30's awhile back said he tried that option but no luck.

Ended up going through an SAU board member Taran....... Apex Graphics - http://www.apexgfx.com

im just eagarly awaiting them now :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...