Jump to content
SAU Community

Recommended Posts

Hi Guys,

I have an R32 GTS that was stolen and recovered a while ago.. I did the whole rb20det swap while I was getting it back on the road.. Like most guys, I opted for a warlboro intank pump thinking it would do the job..

Well, About 6 months to the day I got it going again, the pump gave up the ghost just after it had been for its newest WOF (warrant of fitness here in NZ).. The car is my dailydriver so I had to pool all my money together and commit to overkilling the fuel system!

As a bit of a background, I make alloy car/industrial products/tig weld for a living, so I made the surge tank in house.. It was just sitting idle not finished (no mounts or a mount for the pump) when the original pump decided to go chug chug bang.

So, I purchase a Bosch 044 External from a trade electronic supply local to me ($325 +gst), 4 meters of 5/16" fuel hose (8mm) and my auto electronic mate wired it up for me..

I used a standard rb20de fuel pump as the lift pump.. this is still wired from the factory wiring, the trigger for this pump also triggers the bosch via a relay. I had doubts at first that it was keeping the tank full.. but it definitly is..

This tank was made by me when I first started welding (about 8 mnths ago)

Fittings are standard 3/8"bspt, using a speedflow -8 male weldon on the bottom (rewelded a new one after I dropped the tank landing on the taper, stuffing the fitting!)

It goes from speedflow -8male to -8female to -8 female coupler then to -8 male to m16x1.5 on the pump..

I needed the pump to connect to standard skyline fittings, I can't afford to convert the whole system to -6 from the pump to the rail at the moment, so I got a m14x1.5 to -6 adaptor and welded an 8mm nipple onto a -8 cap.. works great.

I'll never outflow this system and it is definitly overkill.. but i'm happy.

The tank is constructed out of 100x100x3mm alloy, 3mm base/top/bottom..

The spacer lugs / base are temp for the moment till I can afford an inline -8 filter, then I'll remake the base again with that filter.. I'm also going to put a proper grommit where the lines come through the body, they are sealing fine now.. but I want to be able to trust it.. it's just temp for the moment!

Any questions/criticisim feel free..

Now, with pics:

post-8270-1188719250_thumb.jpg

post-8270-1188719308_thumb.jpg

post-8270-1188719342_thumb.jpg

post-8270-1188719377_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/183374-my-surge-tank-setup/
Share on other sites

  • 2 weeks later...
all looks nice n neat, only bad thing i see is that the earth wiring is red, wont make anything run any different but i prefer to keep my earth wires black and positive red.

Hi, The negative wiring is red with a black conduit on the outside of it, you just cant see it because it's "taped" with loom tape.. The setup works really well, just to tidy it up more to my liking i'll extend all the wiring and hide it when I redo my boot lining (The car was stolen and strippd a while back, bastards!)

Also, while thinking about it, this setup works flawlessly.. I had my doubts at first that the non turbo pump could handle the jandle.. I used to get really bad surge/cutouts when doing donuts at the burnout comps here, it's rather embarrasing.. now I get none of this, car skids like it should do..

Just wish the tyres would last longer or I had more power so I can do 3rd :happy: damn rb20det!

I really think this is a worthwhile investment for anyone that's pushing a bit of power or is smart about reliability.. Basic outlay was for the pump ($325+GST NZD) and 4meters of fuel hose ($40 NZD).. If I had more money I'd go braided lines.. as it stands I'm remaking the main fuel line from tank > engine bay out of larger stainless steel piping so I can go -8 from tank to engine.. it's way overkill, but oh well!

Edited by salival
  • 1 month later...
same in regard to wires, heres a pic of mine.

Ive lost count of how many hours ive put into it, i bought the surge tank but made the rest ;)

not finished yet, gotta polish it all etc

is that safe with the fuel so close to the battory

im putting a fibrglass cover between the 2 battories i have in the boot and the old lpg bottle i turned into a surge tank by braising a few fittings on it well c how it goes

what u using 4 a pick up pump

post-29910-1193045281.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...