Jump to content
SAU Community

Recommended Posts

Ran it tonight..went well only ran it on low boost (21psi) to "shake it down"

I finally reached my 20th run tonight so still very much a novice.

So here's what happened...

1st pass 1.60 60' short shifted all gears and ran 10.7 @ 130 MPH

2nd pass 1.49 60' gave it a bit more in each gear and ran 10.4 @ 134 MPH

3rd pass got hassled at the start line about only having 1 arm restraint and forgot to switch it back into 4WD (this was my last run as they would not allow another pass without both arm restraints fitted). Launched it off the limiter and lit it up spinning the rears (2WD) past 60' (1.90). But really put the foot down in 3rd and went through the traps for a new MPH PB of 137 MPH. Across the line both belts (power steering and alternator) came off and tore a huge hole in my top radiator hose. Thus ending the fun for the night.

When its fully tuned with full boost and a driver with a bit more experience this things gonna be awesome.

The car now weighs 3030lbs or 1375kg...but, im still over 100kg.

  • Replies 682
  • Created
  • Last Reply

Top Posters In This Topic

Nice MPH and car weight, you must be stoked.

Chris, even when i had busted the radiator hose and the night was over for the car i a had a smile on my face and was very impressed with the potential of the car.

Yes i was "stoked" :thumbsup:

Chris, even when i had busted the radiator hose and the night was over for the car i a had a smile on my face and was very impressed with the potential of the car.

Yes i was "stoked" :thumbsup:

well done Pauly. Pond and I are proud of you and Twoogle. :worship: Next time I will be able to come and cheer you on.

Stace xx

Congratulations, sounds like its going to be a winner!

RH9 club?

Thats the idea...9's on radials.

no one's done it B4 on low mounts...let alone with synchro box and a Power FC.

We still are yet to connect the Nitrous set-up as well.

Im very happy with the progress so far.

Very nice!!!!

Who said the power fc is a crappy computer ? :thumbsup: are you running AFM's ? or map sensor version?

Hope you crack the 9's without the cheating gas.. Will be very impressive when you do.

Thats the idea...9's on radials.

no one's done it B4 on low mounts...let alone with synchro box and a Power FC.

We still are yet to connect the Nitrous set-up as well.

Im very happy with the progress so far.

and here i was thinking rh9 had to include twin low mounts...

thats awesome!

whens the next outing?

and here i was thinking rh9 had to include twin low mounts...

thats awesome!

whens the next outing?

Running AFM version of Power FC

Looking to run at a private track hire on Saturday.

in this thread http://www.skylinesaustralia.com/forums/in...howtopic=185614 you said

you said you had a SM4 plug and play with MAP sensor..

different cars I guess.

I said "yes we have one"

but...not installed yet

this car goes back a long way that i can remember. Good to see its still going well.

Its an oldie but a goodie.

Car was originally a 1st Anniversary wedding present back in 2001.

1st anniversary present is traditionally paper...Stace got paper...rego paper.

some data on the 10.4 run...the g-tech was not calibrated correctly so the ET's a little off (0.2secs) but the MPH was spot on

med_gallery_23582_772_49076.jpg

as you can see above, the shift point was set to 9000rpm...i didn't see or activate the shift light for the middle of the run and shifted 1-2 at 8400rpm and 2-3 at 8600rpm

EDIT: just replay'd the run and the shift light only came on going across the line (top of 3rd)

the graph below is speed vs time

med_gallery_23582_772_89277.jpg

the car does not accelerate for 0.4secs on the 1-2 change and 0.5 on the 2-3 change, much improvement is to be had there. Very lazy changes and need to rev the car a little harder through the gears.

EDIT: be kind with your comments 2rismo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...