Jump to content
SAU Community

Recommended Posts

thanks sky...the result was only 2kw short of its best ever pump fuel figure. Considering how hard we used to push the pump fuel tunes its really impressive to almost top the figure given the limits set.

the plugs were everyones favorite BCPR7ES's....we ran something colder with different style electrode...even they were not the optimum plug for the application.

1100+hp turbo vs a pair of 460hp turbos, its easy to see why its making around the same power but easier paul. it should wake up a hell of a lot more with some decent boost behind it

make sure u grab a plot of afr & timing too please paul

  • Replies 682
  • Created
  • Last Reply

Top Posters In This Topic

1100+hp turbo vs a pair of 460hp turbos, its easy to see why its making around the same power but easier paul. it should wake up a hell of a lot more with some decent boost behind it

make sure u grab a plot of afr & timing too please paul

i remember when Mark was tuning the Autronic ECU with the GT-RS's the difference between 22 and 25psi was mad...one made good power, the other made the car almost jump off the dyno. They really woke up and it was only 3 measly psi difference.

AFR power and torque only.

i remember when Mark was tuning the Autronic ECU with the GT-RS's the difference between 22 and 25psi was mad...one made good power, the other made the car almost jump off the dyno. They really woke up and it was only 3 measly psi difference.

AFR power and torque only.

all i was interested in was the amount of timing inaccuracy there is up in the rev range, i'm assuming ur still using the factory cas only for timing? could be something worth looking into, even if u dont want to give out those details

all i was interested in was the amount of timing inaccuracy there is up in the rev range, i'm assuming ur still using the factory cas only for timing? could be something worth looking into, even if u dont want to give out those details

we use the Nissan CAS for pump fuel...have another set-up for race fuel when we 'wick it up'.

Edited by DiRTgarage
why would you change the cas? the vi-pec uses a digital signal

couple of reasons...crank twist and belt deflection. Mark says its the way to go on a WOT high rpm drag car...im just doing as im told by the master. Its no fluke he's the 3rd fastest in the world, his car is ultra consistent and reliable. The custom set-up does not use a tooth style trigger wheel mounted on the nose of the crank...its nice and stealthy. :P Im sure Shane knows the set-up im refering to.

Edited by DiRTgarage
couple of reasons...crank twist and belt deflection. Mark says its the way to go on a WOT high rpm drag car...im just doing as im told by the master. Its no fluke he's the 3rd fastest in the world, his car is ultra consistent and reliable. The custom set-up does not use a tooth style trigger wheel mounted on the nose of the crank...its nice and stealthy. :thumbsup: Im sure Shane knows the set-up im refering to.

ah yes so u do, i couldnt remember if it was you or mark that used that 'backwards' setup

Paul will you always be running the bell mouth on the turbo with no filter?

Nice result.

Will a power band of 3500 rpm be enough to get you down the quarter faster than before with out a super dooper gear box?

Paul will you always be running the bell mouth on the turbo with no filter?

Nice result.

Will a power band of 3500 rpm be enough to get you down the quarter faster than before with out a super dooper gear box?

No i will not always run the Japanese air filter...getting a pipe made up this week to suit 2 large K&N items.

Yeah its a nice result but its not a real indication of what it will do...the dyno printout is pretty useless as the line disappears off the page ill get Wanye to rescale it tomorrow. The AFR's read by the dyno on the 465 run were closer to 11 than 11.4...yikes! But this was may have been due to the plug change as it was spot on 11.4's the night before.

I do have a super dooper gearbox...its a PPG fully optioned straight cut dogbox. The car shouldn't see much less than 7000rpm down the strip if im on my game.

Took it for a run on my 'test track' today...its nuts already!

Edited by DiRTgarage
I was thinking something sequential. Is yours still a H pattern?

What ever you use it still takes nothing away from the car being nuts. Good work.

Yes its a H pattern. The box is so slick to change and not a hassle at all on the street once you work out the way it likes to be shifted. On the upshift you would be hard pressed to even know it was a dogbox and on the downshift a simple increase of about 500rpm double shuffling allows it to select the lower gear without the clunk.

Edited by DiRTgarage
1100+hp turbo vs a pair of 460hp turbos, its easy to see why its making around the same power but easier paul. it should wake up a hell of a lot more with some decent boost behind it

Paul, are there 2 different trims of the GTR-s kit? Or did you bolt on 2 SR20 spec ones? When I bought mine they were advertised as a 700ps kit for Rb26.

Thanks

Edited by Evocoop
Yes its a H pattern. The box is so slick to change and not a hassle at all on the street once you work out the way it likes to be shifted. On the upshift you would be hard pressed to even know it was a dogbox and on the downshift a simple increase of about 500rpm double shuffling allows it to select the lower gear without the clunk.

Hey paul, do you know what marks fastest time was with the hks t51r on street tyres?

Cheers, mat.

Haha, im keen to see his GTRS graph at 22psi vs the 25psi one

No doubt the single wouldnt be as much fun for what i use the GTR for compared to Pauls use, but then he's not worried about lag :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...