Jump to content
SAU Community

Recommended Posts

I have owned the car for almost 2.5 years. I am the first owner in Australia. Imported the car through imports101. The car landed in April 2005 and was complienced by Carizma. This car has always been very reliable, and the only problem i ever had was with the original RB20DET engine, which dropped a cylinder. At the time i was quite annoyed, but it gave me a reason to put in an RB25DET!

All the necessary engine conversion work was done by Roshan at Driftline Racing. No corners were cut, and i ensured everything was done as well as it could have been.

I have attended 3 track days in the car and it has been great to me at all of them... only problem it had was needing MORE TYRES!

The Rear seats, Carpet and sound deadening have been removed and the entire floor has been painted matt black. This was done in May this year. At the same time, I had the majority of the car Re Sprayed to freshen it up when i put the Type-m kit on.

The Engine and gearbox came out of a R33 Series 2 GTS-t front cut.

Kilometres: 65,000 (Engine swap was done at 49,000)

Complianced: Yes

Registered: Yes, Until April 28th 2008

Transmission: 5 speed Manual

Engine: 6 cylinder RB25DET Turbo 2.5L

Modifications:

RB25DET Engine Swap

RB25DET Gear Box

Brand new Exedy Heavy Duty Clutch

Custom R32/R33 Tailshaft

Cusco Adjustable Castor Rods

Cusco Front and Rear Sway Bars

Cusco Front and Rear Strut Braces

Greddy Intercooler and Piping

Power FC with Hand Controller

Bride Brix II Seat

Tuned By Dr Drift

Nismo 2 Way LSD

Vertex Front Bar

Type-m Side skirts and rear bar

Flared rear guards (wider than usual)

Tomei Hicas Lock System

Twin Davis Craig Thermo Fans

Greddy Oil Catch Can

R32 GTR Wheels

Custom 3 Inch Exhaust w/High Flow Cat

ReSpray in Custom Gold

HKS Hypermax Suspension

Z32 AFM

Dr Drift Boost Controller

GTR Fuel Pump

R32 GTR Black Bonnet

2 HKS Guages - Water/Eng Temp

Pivot Full Auto Turbo timer

Pod Filter

Immobileser (Playing up)

Producing a SAFE 210RWKW @ Dr Drift

$17,000 ONO

Contact Troy...

[email protected] (Also for MSN)

0409875864

Car is Currently located 1hr from CBD

Will add more pics shortly

post-13769-1189059405_thumb.jpg

post-13769-1189059574_thumb.jpg

post-13769-1189059642_thumb.jpg

post-13769-1189061206_thumb.jpg

post-13769-1189061428_thumb.jpg

Edited by Prospector
Link to comment
https://www.sau.com.au/forums/topic/183952-trackstreet-r32-gts-t/
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...