Jump to content
SAU Community

Recommended Posts

capuccino coolant? thats what my navara with the blown head gasket does....its air getting into the coolant from the cylinder. If you leave the radiator cap off when running, once the thermostat opens you will probably see bubbles moving through the coolant as well.

It won't necessarily run hot until you have lost enough of the coolant.

Leakdown test could confirm.

Or just chuck a bottle of chemiweld in the radiator....

Link to comment
https://www.sau.com.au/forums/topic/183985-foamy-coolant/#findComment-3332051
Share on other sites

cheers guys. well i just took it for a drive, was fine, but wen i got home i checked everything and one of the hoses has blown at the back of the head. it is a spraying sort of leak so must be a small hole in the hose. i blew the top radiator hose about a month ago and changed it without changing the rest of them could this have something to do with it? if its a blown head gasket, what must be done to rectify, there is no water in the oil or oil in the coolant by the way. my car is goin in to the workshop for turbo fitting,pfc ect ect in 3 weeks should i get it sorted then??

Link to comment
https://www.sau.com.au/forums/topic/183985-foamy-coolant/#findComment-3332169
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
    • Yeah, Duncan is helping sell me back to Android devices. I've hated the whole Android head units due to their speed issues. Even in my old Hyundai Kona (2022 model), it behind the scenes was Android, and slow and shitty to start up. Once running wasn't bad, but still a good 15 to 30 seconds.
    • My roof rails are off atm on the E39 until the rust is fixed. I did find another little bit of surface rust under the rails when I took them off. As @soviet_merlin said I'd just leave them alone unless you're planning on ensuring they're properly sealed. I was on the fence about leaving them off as the delete is still a thing in BMW E39's but I feel like the car is missing something (er, it is, der) with them off and I'm looking forward to putting them back on.
×
×
  • Create New...