Jump to content
SAU Community

Dyno Result It, What Do U Think?

kay33

By kay33,
in Engines & Forced Induction

 Share

Recommended Posts

SHY_33 Apprentice

SHY_33

Posted
Posted

Thats a very hi dyno report iv only got done acl forgies hks turbo from turbo back front mount z32 airflow and a apexi power fc and i only got 170rkw and running a happy 15psi plus my motor is only 2000ks old,

iv been told depending on what mode the dyno is set on u will get a diffrent kw reading my mate went to rajab and he had 250 rwk and then went to jpc and only got 225 + his car went quicker afterbeing tuned by jpc then rajab

i cant say anything cause mines on 15psi but im trying to blow it to fit a big1, they only blow the exhaust wheel off anyway and u can pick a standar 1 up for stuff all. my goal is to atleast hit 280kw and run a 12

but looking at all the things that have been done to all the cars on here it cost mega dollars to get there

pumbaa Explorer

pumbaa

Posted
Posted
i got 198rwkw and a friend got 200rwkw on racinglines dyno with standard turbo so it sounds a little high but autos's seriously dont sap as much power as what everyone thinks.

all turbos are different i had a standard r32 turb boosted to 17psi for ages and the things still alive!!It was in an r31 sold the car now but its still running fine and the new owner is not afraid to boost it .

tek_01 Proficient

tek_01

Posted
Posted

haha, how can that be?? 200odd HP and you runs 11 sec?? am i missing something?

ive got similar mods and power as the orignal post and also running 0.9bar and have been for a about 6 months and its been ok so far

no doubt turbo will go one day which gives me more excuse to get a new one =)

MZTRBO Experienced

MZTRBO

Posted
Posted
haha, how can that be?? 200odd HP and you runs 11 sec?? am i missing something?

ive got similar mods and power as the orignal post and also running 0.9bar and have been for a about 6 months and its been ok so far

no doubt turbo will go one day which gives me more excuse to get a new one =)

Yep, its a 850kg car...120Y

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      S1 rb25/s14 starting problem

      By Dose Pipe Sutututu · Posted

      When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...