Jump to content
SAU Community

Recommended Posts

Anyone here runs a HKS GTRS on their 34 Gt-t? I wanna know wot its performance is like, lag, worthy upgrade, bang for buck?

My current mods - Power FC with Apexi boost ctrl, FMIC, pod, turbo back with split dump. Will i need a AFM and injector upgrade for the above turbo?

Cheers to those who can help.

Edited by G_Force
Link to comment
https://www.sau.com.au/forums/topic/184448-hks-gtrs-on-rb25neo/
Share on other sites

Short Answer: Yes

Long Answer: Yes, the HKS GT-RS is rated at 400PS; it should be on full boost @ 16psi by 3000-3200rpm

Cheers. Anyone know the housing size? Am i gonna need a AFM and injectors upgrade with this turbo? Any other mods required?

NYTSKY - i was initially gonna Hi-flow it but mates selling the HKS so if its a direct bolt-on, not much lag & for the right price i may be better off with the HKS.

Edited by G_Force

GT-RS is a good thing, you will most likely need a Z32 AFM and injectors. you might squeeze out enough performance out of your standard injectors with a fuel pressure regulator.

the GT-RS will probably make a little more down low, midrange and with similar power up top over a hi-flow but it is a close thing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...