Jump to content
SAU Community

to greddy profec b or not to greddy profec b, that is the poll  

22 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Just wanted a few opinions on whether its worth going the ebc route on my car...

s1 33 with hks gtrs and all the relevant supporting mods

currently i have a turbosmart bleed value with the stock turbo, and it tends to creep. Will a greedy profec b totally eliminate this, and will it spool any quicker?

the gtrs is going on in a few weeks and i really wanna know if its worth the extra coin to ebc it.

i have searched but i was hoping to get some replies of people with the same turbo and ebc

Link to comment
https://www.sau.com.au/forums/topic/184836-is-it-worth-it-for-my-33/
Share on other sites

No point man.

Get a good bleed valve.

http://www.skylinesaustralia.com/forums/in...p;#entry3342193

Check out the TURBOTECH one I was selling, and there is a link to a full write up on it.

Your best to get a good bleeder and are better off spending the money on something you really need.

There was a big discussion on this not long ago.

I remember GUILT TOY I think his name is was running about 20psi with a GT3540 on a TURBOTECH bleed valve with no creeps.

Run the boost controller off the cooler piping and off the turbo wastegate, bi-passing the standard solenoid.

Are you going after market ECU? If so get a boost controller kit for that particular ECU if you want to go EBC, otherwise don't bother.

My opinion though.

Edited by abu

Crazy!

But then again if you don't want too run 20 psi all the time

You can just push a button and go too standard boost.

It would be difficult setting it back up too that exact setting.

That's just my opinion anyway!

Good luck :kiss:

Yeah the car has a pfc, fuel pump,injectors, fmic, z32 afm blah blah. Its setup for the turbo in every way, i just want it to hold the prosper boost without creeping. I'm sick of planting my foot and watching the boost guage like a hawk. I'd rather be giving my attention to the tacho.

also i'd like to run 2 boost settings as i dont want 850000000 pounds all day every day. Hence the duel stage bleed value i have now

at the moment the bleed value is not running off the cooler pipe, pm its either change that or ebc it.

is there any difference in spool time?

Yeah the car has a pfc, fuel pump,injectors, fmic, z32 afm blah blah. Its setup for the turbo in every way, i just want it to hold the prosper boost without creeping. I'm sick of planting my foot and watching the boost guage like a hawk. I'd rather be giving my attention to the tacho.

also i'd like to run 2 boost settings as i dont want 850000000 pounds all day every day. Hence the duel stage bleed value i have now

at the moment the bleed value is not running off the cooler pipe, pm its either change that or ebc it.

is there any difference in spool time?

Guilt Toy is in the thread now, he will answer most of your questions I hope :kiss:

But I personally think a bleed valve can hold boost very well, depending on the type of bleed valve and how its intalled.

You can get different types of bleed valves which work in differnt ways.. some are good, other are shit. TURBOTECH has been proven by MANY to be good.

I will post up a intsallation link for installing a bleed valve into an R33.

If you want to run dual boost use a bleeder, or in my opinion if you REALLY want an EBC go to a PFC boost controller kit. That will do the job.

i was driving around all day long on 25psi 363rwkw for a few months and was doing around 1000 - 1500km's a week with the turbotech.

The only reason why i got a EBC (a old one that was given to me) was because the bolt and spring and ball bearing fell out on the road somehwere on the central coast when i was cruising around and i needed something to replace it.

Turbotech all the way. once you learn how to set them up they are great and deserve credit for what they are.

I have found they work better on big external wastegated turbo setups then they do with smaller turbo's :kiss:

hey mate

the turbotech brings up boot much quicker then every other bleed valve setup i have seen.

I used to have 2 turbotech's... one set to 25psi and the other set to 14psi. I would just pop the bonnet take the low boost setting valve off and replace it with the high one. Can be done very quickly even when setting at a set of lights i was able to change it with plenty of time to spare :kiss:

PS: was not racing

Yeah the car has a pfc, fuel pump,injectors, fmic, z32 afm blah blah. Its setup for the turbo in every way, i just want it to hold the prosper boost without creeping. I'm sick of planting my foot and watching the boost guage like a hawk. I'd rather be giving my attention to the tacho.

also i'd like to run 2 boost settings as i dont want 850000000 pounds all day every day. Hence the duel stage bleed value i have now

at the moment the bleed value is not running off the cooler pipe, pm its either change that or ebc it.

is there any difference in spool time?

Also consider that there is no need for you to turn the boost up, then down every time.

Run it on 1 boost setting as tuned and drive it off boost if need be!

If its tuned to 18psi, and you put it down to 7psi, it will run a bit shitty.

Edited by abu
PS: was not racing

Hahaha pull up at set of lights, see some other car pull up next to you...

'Hey mate, wanna run'

'Yeah hold on a sec need to switch to high boost...'

*Hops out and swaps bleed valves*

:kiss:

Actually on topic, been very impressed with turbotechs in my experience with them. Cant really go wrong for the money either...

Hahaha pull up at set of lights, see some other car pull up next to you...

'Hey mate, wanna run'

'Yeah hold on a sec need to switch to high boost...'

*Hops out and swaps bleed valves*

:kiss:

Actually on topic, been very impressed with turbotechs in my experience with them. Cant really go wrong for the money either...

LOL

TURBOTECH - Very good value for money. I just sold my brand new one for $35!

Yeah thats how i have it at the moment, its 13 pounds or off. I have a rocket switch in cabbin...

mainly i want to know if my turbosmart will hold after i put it in the ic piping, and whether an ebc will boost faster

Thanks for that link abu, i have read it before but i only really skimmed over it.

well its ebc for me.

the car's gonna be on a dyno anyway so setup's not a problem.

thanks heaps for all the replies :kiss:

Hahaha pull up at set of lights, see some other car pull up next to you...

'Hey mate, wanna run'

'Yeah hold on a sec need to switch to high boost...'

*Hops out and swaps bleed valves*

:kiss:

Actually on topic, been very impressed with turbotechs in my experience with them. Cant really go wrong for the money either...

Lol!

Haha, well good luck with your choice :D!

Thanks for that link abu, i have read it before but i only really skimmed over it.

well its ebc for me.

the car's gonna be on a dyno anyway so setup's not a problem.

thanks heaps for all the replies :D

Not a problem mate, good luck with it all!

Which EBC you going with? I recommend a BLITZ or a PFC EBC kit :)

BLITZ's ones are so simple to setup, will only take a few minutes. Very easy to configure and adjust as well. The solenoids are a really good design and hold boost strong.

BLITZ DSBC SPEC R are a dual solenoid unit, could get one for about $300 2nd hand.

Otherwise a 2nd hand GREDDY PROFEC B II, about $250 off the forums. Also very easy to setup/adjust.

Thats what I recommend anyways lol :kiss:

Thanks,

Abu

Edited by abu

Manual boost controllers work MUCH MUCH better with ext gates than int gate turbo's.

A mates ext gate setup with my turbo tech was perfect held what ever we pushed in; bolted the same turbo tech on to my IW setup and it wouldn't hold any more than 17.5psi.

Invest in an adjustable actuator with the spring tension to suit your application and use the turbo-tech for fine adjustments. This combination will hold boost better than an EBC and standard actuator. This is the setup I have anyway and it works well (I now use an avc-r with an adjustable actuator does the same thing)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...