Jump to content
SAU Community

Drag R32 Gtr - Chute Mounting

exXU1

By exXU1,
in Motorsport Discussion & Builds

 Share

Recommended Posts

exXU1 Mentor

exXU1

Posted
Posted

Can any one direct me or advise on the mounting of the rear bar to attach the chute to please?

I have been looking at the car and where the rear bumber bar comes out looks a logical place to me. would still like to see some close up pics of the way some people have set them up if possible.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/184898-drag-r32-gtr-chute-mounting/
Share on other sites
exXU1 Mentor

exXU1

Posted
  • Author
Posted
most i've seen mount the bar for the chute mount to the tow hooks.

yep , thats what i have seen , but only passing buy before it was my turn to do so , so i haven't really had a proper look.

Wish i could get a close up of what other people may have done?

Thanks for you input Beer Baron

exXU1 Mentor

exXU1

Posted
  • Author
Posted

That looks tidy, and thanks for your input.

May i ask whos car rhat is because those rims look onteresting as i want o run same diameter fronts as the back but a narrower tyre width, would you know how i could contact this persaon at all - or is it yours ?

Cheers

Dave

  • 5 weeks later...
  • 2 weeks later...
exXU1 Mentor

exXU1

Posted
  • Author
Posted

Hey gents-

thatnks very much for your in put and yes it has helped - very differant from the way i ended up doing it - but a another bit of information for fellow drag gtr members.

Cheers.

Dont know if this photos will help you.

nec4.jpg

cage4.jpg

Keith

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...