Jump to content
SAU Community

Recommended Posts

from what i have been told its better to buy an aftermarket ecu, than a safc.

but im guessing if u were to get ur stock ecu remapped + safc it would be different.

but sure about whether it would make any difference power wise tho

Link to comment
https://www.sau.com.au/forums/topic/185146-apexi-safc/#findComment-3351176
Share on other sites

You will notice a difference, its worth going to an SAFC in my opinion.

I sold mine to a guy with a NA Supra with a few mods, such as exhaust and CAI.

He go this tuned as from factory like most cars, they are tuned to run ruch.

He picked up I think about 10rwkw? Which isn't a bad increase in power, feels more punch to drive and revs a lot smoother.

He now also gets better fuel economy.

No need for a standalone ECU for an NA car, there is just not that much to tuning required as oppose to a turbo car.

Edited by abu
Link to comment
https://www.sau.com.au/forums/topic/185146-apexi-safc/#findComment-3351213
Share on other sites

i have an SAFC2.

in all honesty, you'll see 1~5kw; but you have to look at the bigger picture and compare the AFR before and after.

wont be worth doing unless you've done loads of induction/exhaust mods. bigger throttle body, cams, filter, exhaust, extractors, etc... then you can use it to clean up the tune.

Link to comment
https://www.sau.com.au/forums/topic/185146-apexi-safc/#findComment-3351383
Share on other sites

  • 2 weeks later...

as eug said, it will depend on how things are before hand. if your AFR's are good then you will gain very little by installing any aftermarket ecu. if your AFR's could use a bit of a tidy up then a safc will help with that at a fraction of the cost of a full ecu.

and 10kw gain from a natro car is a pretty good power gain.

Link to comment
https://www.sau.com.au/forums/topic/185146-apexi-safc/#findComment-3379800
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I refreshed the OEM injectors with the kit and connected it up. It now ideals okay even with the IACV removed. Driving still has the same cutoff issue like the 550cc injectors so the issue is somewhere else. I bought FPG's Fuel Pump Hanger. I will be installing it next, but it is not as straightforward as I thought it was with my limited wiring knowledge and no instruction on the specific model I purchased (FPG-089). I also got the incorrect billet clamp as I could not find info on the OEM sizing.
    • Stop looking at the garage floor, and turn the radio up a bit louder if there's any strange noises...
    • No. Turbo shuffle and surge/flutter are not the same thing. Specifically, on a GTR, turbo shuffle has a definite meaning. On a GTR, the twin turbos are assumed to be the same thing and to operate the same way, exactly. In reality, they do not. Their exhaust sides are fed and exhaust a little differently, to each other. Their inlet sides are fed and exhausted a little differently, to each other. Consequently, when they are "working" they are often at slightly different points on the compressor map compared to each other. What this means, particularly when coming on boost, is that one of them will spool up and start producing extra flow compared to the other, which will put back pressure on that other compressor, which will push the operating point on that other compressor up (vertically). This will generally result in it bumping up against the surge line on the map, but even if it doesn't, it upsets the compressor and you get this surging shuffle back and forth between them That is "turbo shuffle" on a GTR. It is related to other flutter effects heard on other turbo systems, but it is a particular feature of the somewhat crappy outlet piping arrangement on RB26s. There are plenty of mods that have been attempted with varying levels of success. People have ground out and/or welded more material into the twin turbo pipe to try to prevent it. Extending the divider inside it works, removing material doesn't. There are aftermarket replacement twin turbo pipes available, and these exist pretty mush purely because of this shuffle problem.
    • You can temporarily* use lock collars to keep it in place until you can do the bushes, back the nuts off, slide them in, snug back up. *temporarily is often for ever
    • Thanks for the quick reply. To be clear, when you say turbo shuffle do you mean turbo flutter "stustustu" or referring to something else? I had thought they were the same thing. When I wrote the post my intention was to say it wasn't a flutter/compression surge sound. My understanding was that a flutter sound would be occurring when throttle is released, whereas I can keep the throttle in the same position for this noise
×
×
  • Create New...