Jump to content
SAU Community

Recommended Posts

also got the car tuned but we stoped at 360kw need another fuel pump after the hks in tank couldnt do past 375kw so better to not break the engine and down the power a bit makes 360kw at 5500rpm with a monster power curve the engine has got plenty more in it but like i said better not to lean the bitch out and id like to keep the standard box to hold up as long as possible will get a pic up of the dyno sheet soon with this power it makes the car very streetable,responsive and a friken bullet :cool:

  • Replies 200
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

Hi guys i built this engine for Anthony and he has put the best of everything in this engine this car with a hard tune will make we over 400kw at all four wheels as is it made 365 kw at all four on only 18psi we build and service a lot of gtrs at my work shop and this is by fare one of the best looking gtrs we have worked on the car has lots of bling and the power to match if you had to build this car with the motor ,big brakes and all the other goodies you would spend alot more then he is asking for it so if you are not interested in buying it why try and put shit on it this is a hot looking car :nyaanyaa:

hehe thanks jason ur making me blush .... well guys its true what jason says he builds some tuff engines just look at his own race car and at this price its a steal thats why i have rejected so many low ball offers and if anyone wants to know about the car or the build jasons the man to speak to for any info ..

cheers jason appreciate it bud

also like to throw in that i ate up and spat out a ferrari 598 marrenello on the weekend it was a nice sight to se him eat my richness from the zorstttt:P

  • 1 month later...
  • 2 weeks later...
i want a 350z or a v35 any one wanna swap

Man if only you had a slightly less modded GTR. I'm looking to swap my V35 for an R32 but unfortunately not looking to spend as much.

Good luck, that's one seriously nice car you have.

  • 2 weeks later...
  • 1 month later...

mmmm ... lol... :miner:

Doesn't look like it's selling soon.. which is good!!

My mate in Iraq (deployed) is dead set keen on this car... looks like it might still be on the market when he gets back.. :yes:

Sweet car..

thanks tomek !!! it might still be avaliable as no one has made me a serious offer !!!!! although very tempted to do some more mods to it after going to superlap hehehehe let me know when your mate gets back id like to see the car go to some one who really appreciates the car .....

  • 4 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...