Jump to content
SAU Community

Recommended Posts

i got fined the other nite for having my number plate on the LHS of the car (33gtst) $240 dollars later i called the transport department and they said that the plate can be anywhere on the front of the car as long as it is viewable from a 45' angle??? is there anyway of getting out of this redulious fine without going to court??

Link to comment
https://www.sau.com.au/forums/topic/185493-help/
Share on other sites

no it is better going to court buddy, just provide documented evidence from the transport company that states that you are allowed to have your plate there. Provide evidence from mitsubishi about the late model evo which has it there....chances are if you provide this evidence..you may not need it, but the judge my look at it and WTF are you wasting my time with this and throw it out.

Best going to court buddy.

Link to comment
https://www.sau.com.au/forums/topic/185493-help/#findComment-3356201
Share on other sites

You need to take a very scientific approach to beating this fine...

Park your car at a shopping centre right on the white line under the middle of the car, then measure a 45 degre angle from the front of the car in both directions.

Be very accurate, mark the 45 degre line with chalk on the concrete, make sure you take photos of you doing the measuring and the marking.

Then stand back 20 metres or so and take a photo of the front of your car with your camera from both lines.

If you can see the number plate easily in both photos you will win the case easily, if you cannot see it in one of the photos then dont bother going to court, just pay the fine.

Does this make any sence?

Link to comment
https://www.sau.com.au/forums/topic/185493-help/#findComment-3356274
Share on other sites

Dude was it a state traffic task force officer that fined you? or a normal copper? i had a defect that i thought was stupid/irrelevant/bullshit and i wrote in to the officer in charge @ STTF with all my evidence and everything and he wrote back saying no action was required on my behalf and he would look into it further and get back to me, its now 3 months or so later and i havent heard back from him but i'm sure when/if i hear back he will favour my way, you should do the same

Link to comment
https://www.sau.com.au/forums/topic/185493-help/#findComment-3357743
Share on other sites

The ONLY way things like this will stop happening is for everyone who cops a bullshit fine/harassment etc to go thru the inconvenience of taking it thru court, turn up well armed & have the facts give the beak no option but to throw it out.

Only then will some sort of precedent be set & hopefully the cowboys within the service will be finally told to back the f**k off & leave us alone when it comes to this sort of petty crap.

There is no doubt that police have their place in the world, but sometimes some of them need to be reminded exactly where that place is........

Link to comment
https://www.sau.com.au/forums/topic/185493-help/#findComment-3358375
Share on other sites

I really don't see how you can get done for having your plate offset to one side, if it is veiwable under their rules, then its legal.

I work on Alfa Romeo's, with the design of their front ends the factory mounting position for the number plate is offset on the left hand side of the vehicle, there was something back in 98 when the 156 was first released here that they had to change some rule allowing this, not 100% sure on what state of what the rule was, but still we have never had any customer complain of being fined for an offset number plate.

Find out the rules and if you are sweet under then take it futher.

Good luck

Link to comment
https://www.sau.com.au/forums/topic/185493-help/#findComment-3358501
Share on other sites

i went and saw a transport department officer about it yesterady...he said good luck and told me to try and put it in the middle...f*@kin F#&K F*&Ks...looks like i just gotta pay because of being a minority.

Link to comment
https://www.sau.com.au/forums/topic/185493-help/#findComment-3359443
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
×
×
  • Create New...