Jump to content
SAU Community

Recommended Posts

went shit, ET time was not to good but speed was not bad! if i could have found traction time would of been alot better! semi slicks FTW next time. anyways

ET.13.5

speed.186.41 kmh (115.83mph)

60': 2.538sec - shit no traction

car: 33GTST

:D

Edited by RB MAN
There's a 12.2 waiting to be had on street tyres if you get the launch right! Well done.

It was so not easy hey, who ever drag racing is easy is wrong well with power it is really hard especially with street tyres.

anyways it was my frist time down there! practice makes perfect i would say!

12.2 would be very very nice hehe

first time i ever been down to the drags and i entered my 33 GTST in...

she's running an average 283hp @ 13psi...

guess what i got on my first run????

15.1!!!!!! LOL, with a reaction time of 1.03 seconds, lol. I had no clue what i was doing and had no clue the yellow lights dumped down so quickly. I panicked and just slammed the clutch and since i didnt dry my tires (there only street ones so i thought it wouldnt be that much difference) i lost all of first in about half a second so i slammed it in second and i already lost a good second out of my time... OUCH

second run i did still an average of 14.3 and since i saw a few races before i ran the second time, i got to tell when to start releasing the clutch so i got a reaction time of 0.04 seconds.

i only ran twice coz i got there in peak hour where is took an hour to get scrutenised then the long wait for the turbo's to go through.

but yer, definantly will go next week and have another crack at it

first time i ever been down to the drags and i entered my 33 GTST in...

she's running an average 283hp @ 13psi...

guess what i got on my first run????

15.1!!!!!! LOL, with a reaction time of 1.03 seconds, lol. I had no clue what i was doing and had no clue the yellow lights dumped down so quickly. I panicked and just slammed the clutch and since i didnt dry my tires (there only street ones so i thought it wouldnt be that much difference) i lost all of first in about half a second so i slammed it in second and i already lost a good second out of my time... OUCH

second run i did still an average of 14.3 and since i saw a few races before i ran the second time, i got to tell when to start releasing the clutch so i got a reaction time of 0.04 seconds.

i only ran twice coz i got there in peak hour where is took an hour to get scrutenised then the long wait for the turbo's to go through.

but yer, definantly will go next week and have another crack at it

good work on the 14.3, my door went faster on your car than mine, hahah

300rwhp and all i managed was a 15.1 (albeit the turbo had a VERY blown seal at that stage...)

edit: also ryan, your car wont be stock boost if you have fmic, exhaust, pod, etc.. that all raises the boost regardless of if you have a controller or not.

you're probably running about 10psi.

good work on the 14.3, my door went faster on your car than mine, hahah

300rwhp and all i managed was a 15.1 (albeit the turbo had a VERY blown seal at that stage...)

edit: also ryan, your car wont be stock boost if you have fmic, exhaust, pod, etc.. that all raises the boost regardless of if you have a controller or not.

you're probably running about 10psi.

HEY MITCH!!!!

um i heard if ur stock boost wif a FMIC, u run lower boost... or same but u got more pipe to fill =/

i dunno

:) i am expecting mid 13's in my 268hp Line!! goes HARD

:wave:

lol, hi gary.

FMIC might be the case, but the exhaust usually pushes the boost up.

my car used to run 10psi with 450x250x60 fmic, pod, and exhaust, with no controller/bleed valve/etc. at all :wave:

mid/low 13's is pretty achievable in a R33 with the usual mods, you just need to work on your launches. my first (and subsequently last launch of the night, and the car) resulted in wheel spin all the way through first and second gear.

HEY MITCH!!!!

um i heard if ur stock boost wif a FMIC, u run lower boost... or same but u got more pipe to fill =/

i dunno

:banana: i am expecting mid 13's in my 268hp Line!! goes HARD

:nyaanyaa:

the stock fmic is increadibly restrictive

you will run a bit more boost when its removed for a proper one

managed a 13.700 with dead stock car except exhaust on 19" rims.....

now i run a 13 flat with exhaust, fmic, boost 11psi.....oh and an old set of nittos....

its all in the launch.....aim for below 2.2 street tyres and below 2 with drag radials....

anyone want to buy a set of used drag radials that have a few meets left in them PM me....i just bought a gtr and wont be needing them anymore....

Im still yet to take my r32 down but judging by u guys i should easily do a low 14. ive just got a 3in De-cat exhaust with 600x300x75fmic and im running 13psi. do u reckon very high 13's are possible with the right launch?

took my car first time ever i went there, 1st run 14.8 2nd run 14.099 third run 15.2 <--- couldnt get into third 3rd, my main problem was traction in 1st and second, and runnin wierd boost from .3 bar to infinite so car was runnin r+r depending on gear running actuator ONLY lol, once i get car to run 12psi again i might have half a chance to get into the 13s

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
    • Genuine is best. I have to replace my SIL's Audi A3 DRL module because the $20 alibaba special one has faded within a month... Sigh...
×
×
  • Create New...