Jump to content
SAU Community

Recommended Posts

i recently seen my mechanic to get a quote for a heavy duty clutch and he told me that it will cost $300 plus another $100 to install it.

then he says that it will damage different areas on my car and it can eventually crack my firewall.

do yous know what hes on about cause one of my friends says the clutch has nothing to do with a firewall .

also any ideas of what clutch i should get for it.

thanks.

thats strange hey. does he work on skylines alot? and um $300 for a heavy duty clutch doesnt sound that heavy duty to me, especially if it will cause damage to other areas of the car. $100 is dirt cheap for labour, sounds like a small back yard job or super mates rates. id say find or at least ask another mech in my opinion.

good luck with it.

thats strange hey. does he work on skylines alot? and um $300 for a heavy duty clutch doesnt sound that heavy duty to me, especially if it will cause damage to other areas of the car. $100 is dirt cheap for labour, sounds like a small back yard job or super mates rates. id say find or at least ask another mech in my opinion.

good luck with it.

tell him to shut up ...............if the clutch in 300 then it aint heavy duty

plus i have had a heavy duty clutch in my car for over a year and nuthing has happened

:laughing-smiley-014:

Im a mechanic and that is one of the funniest things i've ever heard. As for the $300 dollars, for my heavy duty clutch i spent $350, but i got it trade price. Spend $500 on the clutch and it will last unless you have big power, and as for labour I would expect $300-$400 for fitting.

Edited by r33nut

yeah minimum for a brand new heavy duty is $350... at $300 he's probably putting a Nissan Patrol clutch in your car, which is technically heavier duty than your standard one. $100 labour's not bad tho.

As for firewall... wtf? unless the flywheel is machined down so much that it gets too light and somehow rips itself off and flys up through your bellhousing and into your firewall. likelyhood 0.00000000000001%

find a new mechanic.

Excedy heavy duty clutch!! 340 only

This is what i have.. has been for last two years and still going strong!!

Supports up to 240kw..

--

and yea your mech is a noob.. lol

A heavy duty clutch in mine hasnt caused any problems!!

these are the type of so called "mechanics" that should be shot

i wouldnt let a guy that says that look at my car, let alone touch it...

Definately find another bloke, but changing a clutch isnt that hard and if your handy with the tools you can do it yourself. I would recommend exedy as a brand, anything with a stronger pressure plate, and depending on you power maybe some thing with a ceramic facing clutch plate

As for firewall... wtf? unless the flywheel is machined down so much that it gets too light and somehow rips itself off and flys up through your bellhousing and into your firewall. likelyhood 0.00000000000001%

there's a guy on here that managed to do that. The flywheel literaly exploded and tore the car to pieces!

if u were to get a havy duty clutch it wont damage anything in your car but if u were to get a brasbutton clutch then u could pop ur box unles ur car is extreamly moded. normal hevy duty wont do any damage

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...