Jump to content
SAU Community

Recommended Posts

Hey Guys just wanted your opinion. Ive been looking at some of the ECU postings and Ive been reading people discussing how the Power FC is old technology. What you guys think?

Old Yes.....But Still Effective, Just misses out on some of the Newer stuff available today suck as anti-lag, Ignition cut, Multiple maps ect.

But gains with its plug and play factory style management.....ie You can plug it in and drive.....no need to worry about light load maps, cold start etc.

I swear By mine (R33 GTS-t)

Yeah if they were never discontinued all this talk about PFC being outdated wouldn't have come about.

Its because they're no longer the cheapest and most effective option for its price that its been labeled old and outdated.

Honestly if you could still buy them for $900 odd dollars, would you still say its not a good option? Would you still say get an EMU over a PFC? Some will say yes, but I know plenty would say no.

For the price the discontinued ones go for now, you can pick up later and greater ECU's with more options than you can poke a stick at.

But its time to move on, just accept they're not any longer a very feasible option and you can get something else that will fill your needs anyway for the same price.

But if you can pick one up for a reasonable price then I'd say jump at it. If not don't worry about it and get an EMU.

I bought a PFC just after they were discontinued, got it just as their prices started to rise. It wasn't cheap, but not overly expensive either. I don't regret buying it.

Edited by KeyMaker

"Old" and "outdated" are two different things. Internal combustion's no spring chicken either, but its not like an electric motor going to replace it in a production capacity in the near future. With crude oil "running out", most of the effort to resolve this issue is still going into changing what goes into an internal combustion engine, not the method it converts stored energy into kinetic energy.

The only thing people don't like about the PowerFC, as an entry level "plug & play" ECU, against more modern offerings is an inability to store/load multiple maps within the ECU itself. However, if A'PEXi were to release a new version it wouldn't be a massive step to integrate such functionality. Some memory and a switch / menu for the hand controller would be all that's required.

I hope A'PEXi (or someone else) does replace the discontinued PowerFC, with that extra functionality (and a ECU for the VQ series engines).

Well you can still get a PFC for $900 for a RB26

So IMO they still hold their weight.

The fact it comes with a base tune is also a winner.

Other ECU's might have launch control, or some other feature. But honestly, when are you going to use it in a street car?

Plus we are talking cars 10+ years old now.

As Ash said... Its an excellent option for a street car.

It cold starts, warm starts, idle's, cruises and operates the a/c like a factory ecu.

I wouldn't consider it 'outdated' as it still offers features that only the top end ecu's worth more than 2x its price do.

6x injector drivers (Sequential Injection!), 6 x coil drivers, overrun fuel cut, closed loop o2 control just to name a few. :thumbsup:

Most importantly it just works. Which results in cheaper tuning costs that tuners 'should' be passing on to their customers.

It cold starts, warm starts, idle's, cruises and operates the a/c like a factory ecu.

I wouldn't consider it 'outdated' as it still offers features that only the top end ecu's worth more than 2x its price do.

6x injector drivers (Sequential Injection!), 6 x coil drivers, overrun fuel cut, closed loop o2 control just to name a few. :thumbsup:

100% agreed. for a plug n play to do all these things, it should be highly recommended

I have a POWER FC in my car..and I really don;t know exactly what it does..but is a...MUST. Hmmm hate to disapoint you but we have the same combustion engine since 1800... still I love my line...don't you?????

Cheers,

eug.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
    • What sold me on Trailer Park Boys is this scene: Great stuff, just stay clear from the new Netflix production.
×
×
  • Create New...