Jump to content
SAU Community

Recommended Posts

I have read very little about these pumps, but what he is saying is also the same as what I have read.

It's supposed to be a slightly bigger version of the 040 which looks the same, and is of a similar size but flows more.

If its a genuine BOSCH item there shouldn't be any issues with it.

Apprently is supports about 700hp + and flows something like 300L/hr. (approx)

They are an intank pump so should go in with a few slight adjustments.

Edited by abu

THanks for the quick reply abu, its definitely a genuine pump, and he told me the same thing, that its good for around 700hp, and its very similar to the 040 with an open base.. I'm getting it installed next weekend, hopefully things will go smoothly.

http://apps.bosch.com.au/motorsport/downloads/fuelpumps.pdf

040 is rated at a higher pressure so it is a moving feast on flow rates but 023 flows more.

ive seen this pdf before, i just wanted to know if anyone has installed one in a skyline and what they think of it?

thanks anywayz wolverine..

i just installed a bosch 023 in my bros r33, its the same pump as the 044 (external) but its the internal version so it can pump much more than the 040 and it has an open base for the pick up. It isnt that hard to install, a bit of playing around and you'll get it sitting at the same height as the stock pump.

I recently went to purchase a bosch 040 fuel pump, and my supplier got me an 023 model..

EVL-R33 - If not too much trouble, do you think you could get some good close up pictures of the pump IN / OUT and any serial numbers?

Cheers

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...