Jump to content
SAU Community

Recommended Posts

Good son of rajab theres been some corkers this weekend.

Its like making a cordial drink man. The aim is to make MORE drink, but at the same have the same strength taste. Uv got the ability with your big turbo to pour (move more air) more water into the glass, but where as a weak (lean) drink will just agitate you.. a lean mixture will uncontrollably ignite in your engine and pop it.

FPR (and pressure raise) + SAFC will allow some leeway... but really, if you KNOW you want power, and have a bigger tahbin in mind, grab a real aftermarket ECU and some injectors, sell the FPR and tune to your next bottleneck.

Its not just about a free flowing water source, u gota be able to accurately meter your cordial concentrate delivery, otherwise its weak city and boom.

Good son of rajab theres been some corkers this weekend.

Its like making a cordial drink man. The aim is to make MORE drink, but at the same have the same strength taste. Uv got the ability with your big turbo to pour (move more air) more water into the glass, but where as a weak (lean) drink will just agitate you.. a lean mixture will uncontrollably ignite in your engine and pop it.

FPR (and pressure raise) + SAFC will allow some leeway... but really, if you KNOW you want power, and have a bigger tahbin in mind, grab a real aftermarket ECU and some injectors, sell the FPR and tune to your next bottleneck.

Its not just about a free flowing water source, u gota be able to accurately meter your cordial concentrate delivery, otherwise its weak city and boom.

That my friend, is a GREAT analogy. very good

could've used scotch, but cordial's more PG I guess. No one likes watered down scotch.

Although there is a catch, if the wastegate in your turbo is set to a very low boost at standard then running it with no aftermarket ECU should be safe, it won't be the best, but it'll be safe. I mean, if you had a TD06 25G, and the wastegate was set to 8 PSI (hypothetically speaking of course) then its no different to a standard sized turbo with a wastegate set to 8 PSI, as after it reaches this amount of pressure both turbos will bypass. In fact being a bigger turbo you might find that at lower RPM's the turbo dosen't spool up fast enough to push as much air, and thereby gives you a RICHER mixture. However this is only if your bigger turbo runs an internal wastegate that's set to a close to stock pressure... most aftermarket turbos aren't.

Bottom line, your fuel needs to match the air going in, running rich or lean is not optimal... but too lean can be dangerous.

could've used scotch, but cordial's more PG I guess. No one likes watered down scotch.

Although there is a catch, if the wastegate in your turbo is set to a very low boost at standard then running it with no aftermarket ECU should be safe, it won't be the best, but it'll be safe. I mean, if you had a TD06 25G, and the wastegate was set to 8 PSI (hypothetically speaking of course) then its no different to a standard sized turbo with a wastegate set to 8 PSI, as after it reaches this amount of pressure both turbos will bypass. In fact being a bigger turbo you might find that at lower RPM's the turbo dosen't spool up fast enough to push as much air, and thereby gives you a RICHER mixture. However this is only if your bigger turbo runs an internal wastegate that's set to a close to stock pressure... most aftermarket turbos aren't.

Bottom line, your fuel needs to match the air going in, running rich or lean is not optimal... but too lean can be dangerous.

No entirely accurate.. a bigger turbo at standard boost will still flow more air then a smaller turbo at the same boost. Also the maps will be completely incorrect for the turbo flow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...