Jump to content
SAU Community

Recommended Posts

I got a R33, an original boot without original wing of course and a R34 Nismo Wing... looks tough as and very unique... do it... as far as I know, I thought I was the only one around with this look.

I want to do it, but not sure what it will look like. Anyone got pics or have done it themselves?

i done it about 5 years ago with my old r33 4 door. it made it look heaps better from the rear.

post-1416-1191569965_thumb.jpg

post-1416-1191570006_thumb.jpg

post-1416-1191570027_thumb.jpg

post-1416-1191570050_thumb.jpg

wow thats tough! was it hard to do ? how much it end up costing you for everything?

pretty easy to do as my 4door bootlid was flush (pretty sure all 4 door bootlids are flush) and it came from factory with no wing... so no holes to repair... just had to get the wing, get it painted, then bolt it up.. the rear bar was then purchased later.. and same process..

i think it cost me $90 for the wing+ $100 for painting wing and front bar (only cause a mate of mine is a painter got it cheap) then installed it myself. not much outlay for a unique look on a 4 door

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...