Jump to content
SAU Community

Recommended Posts

im looking at buying a 260RS from japan, its quite heavily modded. What i wanna know can anyone recommend somewhere to get it complied? It will need a few parts swapped over to stock for sure. Im in WA. Most people i have spoken to are not interested, but i wanted to try some more before i gave up.

thanks

neil

Link to comment
https://www.sau.com.au/forums/topic/187758-compliance-question/
Share on other sites

im looking at buying a 260RS from japan, its quite heavily modded. What i wanna know can anyone recommend somewhere to get it complied? It will need a few parts swapped over to stock for sure. Im in WA. Most people i have spoken to are not interested, but i wanted to try some more before i gave up.

thanks

neil

it could be compied interstate if you want ie shipped direct to there then transported to wa .i used nismo in qld and john there was excelent and saved me a lot of heartburn and dollars toboot.from what i have heard some compliance place over there is verry dodgy anyway regards mike

Any chance it is the one on Jspec with twin HKS GTSS turbos and rebuilt engine?

You maybe pushed to get it complied

Try Phil at IAMSHE on the gold coast

yeh thats the one.

Ive tried the 2 WA guys no luck.

Mite email these guys you have mentioned.

thanks muchly for the help guys!!

don't even bother trying to get it complied here in WA. I have a lot of respect for the new guy on the block.......

and I might just leave it at that, but yeah, get it complied interstate, you will save time and money.

this is probly a real noob question...

If i get it complied over east, they have to put stock parts on it etc. Do they license it over there? or do i still need to do it over here? If i do it here, the car has stock stuff now not the nice after market stuff? what happens there?

sorry if its stupid, i just get dumb answers from people over here, its begging to be a pain allready.

when i got my stag it was qld rego all i had to do take papers in to the vic-roads office and they changed it over to vic rego didnt have to get a roadworthy done or anything all they did was checked the vin plate to see if it matched and i drove away with vic reg and plates, only other thing i had to do was send the qld rego label back with a changeover form that i got from vicroads office and i was sent a cheque for the balance of the qld rego bout 2 weeks later.

we got ours complianced over east - and in our particular instance they did not register it over there.

the car arrived here with no plates and we needed to get a temporary permit to drive it around

( only to workshops/ pits etc )

my take on it is.. get the car complianced and returned to a state that can pass pits. Put it over the pits and depending on WHAT mods your going to put back on , just put em back on!

bear in mind you have to take the risk ( as everyone does ) that if you get pulled over and yellow stickered your going to have to revert it back to how it was after compliance.

if you want to talk over the phone I am more than willing to - just PM me and I will give you my number.

I am not claiming to be a know all guru - but I might be able to help

Mods such as coil overs will prob get over the pits as long as the car is not stupidly low.

really depends on what the mods in question are.

this is probly a real noob question...

If i get it complied over east, they have to put stock parts on it etc. Do they license it over there? or do i still need to do it over here? If i do it here, the car has stock stuff now not the nice after market stuff? what happens there?

sorry if its stupid, i just get dumb answers from people over here, its begging to be a pain allready.

dont give up too easily . but in the same breath you need to make an educated and informed decision

Hope that helps

low mount turbos will be no issue and i only see big lumpy cams or aftermarket ecu as possible issues when going over pits in WA. The ecu is ok as long as the pits dont see it and u dont mention it has one :happy:

WOW!! i like it when you talk dirty man!! :thumbsup:

yeah i would of thaught i could sneak over the turbo's, ecu and stuff. I dont mind the fact of risking a sticker everytime i get pulled over, i dont live in perth and the cops wouldnt know what the hell it is where i live.

...... i dont live in perth and the cops wouldnt know what the hell it is where i live.

Most of the cops in Perth don't know what the hell a Stagea is anyway.

I was caught in a police shut down of the last Ignition DVD Hotspot and i was the only one of about 80 cars that got waved through the exit without a breathaliser or licence check :D

oh and two things that might cause you major hassles.

1) - they tried to fail us outright on the dark tint of the rear windows and the rear of the car

so we asked them to get the testing unit out and we passed.

what we DID fail on is the fact that the car did not have an immobiliser.

So BE WARNED - make sure your car has a working immobiliser ( and test it yourself too )

if it does not have an immobiliser your going to need to get one fitted BEFORE you go over the pits.

good luck matey!

Got mine complied at Nizmo in Queensland... then sent by rail across to Perth where I took it to the Pits at Whelshpool to get licenced.... No drama's, the bloke actually knew what it was, had no issues with the dark glass and he only picked up that I had a headlight out which he said just change the bulb mate.... he asked if it had an immobiliser to which I said yep and that was it...

So yeah you wont have any dramas provided the guys at the pits dont pick on your mods ( it will be the cosmetic ones they can easily see )....

Edited by MrGTST
Most of the cops in Perth don't know what the hell a Stagea is anyway.

I was caught in a police shut down of the last Ignition DVD Hotspot and i was the only one of about 80 cars that got waved through the exit without a breathaliser or licence check :)

haha nice work

Got mine complied at Nizmo in Queensland... then sent by rail across to Perth where I took it to the Pits at Whelshpool to get licenced.... No drama's, the bloke actually knew what it was, had no issues with the dark glass and he only picked up that I had a headlight out which he said just change the bulb mate.... he asked if it had an immobiliser to which I said yep and that was it...

So yeah you wont have any dramas provided the guys at the pits dont pick on your mods ( it will be the cosmetic ones they can easily see )....

how much was freight to wa as im getting my stagea from qland

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...