Jump to content
SAU Community

What Ecu To Use

R TUNE

By R TUNE,
in General Automotive Discussion

 Share

Recommended Posts

R TUNE Mentor

R TUNE

Posted
Posted

hey guys im after some info on what ecu to get for the 31.

ill have the following.

2.25" exhaust

exstractors

k&n pod

custom crow cam

adj cam gear

440cc injectors (gtr)

GTR fuel pump.

im getting a price on a links plus and a mate of mine is getting a autotronic (i think or its the one that sounds like motec)

yea any advice would be good i dont mind what type of ecu as long as it dont cost me the earth.

Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/
Share on other sites
kjb_r33 Experienced

kjb_r33

Posted
Posted
hey guys im after some info on what ecu to get for the 31.

ill have the following.

2.25" exhaust

exstractors

k&n pod

custom crow cam

adj cam gear

440cc injectors (gtr)

GTR fuel pump.

im getting a price on a links plus and a mate of mine is getting a autotronic (i think or its the one that sounds like motec)

yea any advice would be good i dont mind what type of ecu as long as it dont cost me the earth.

http://home.aanet.com.au/nistune/

Just got one myself, for my 32

Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/#findComment-3393886
Share on other sites
R TUNE Mentor

R TUNE

Posted
  • Author
Posted
http://home.aanet.com.au/nistune/

Just got one myself, for my 32

hey mate thanks for that, thats first company iv'e seen make a reprogramable ecu for the rb30. and for only $400.

can you tell how youve found the ecu so far, and who would be able to tune it, and how easy it is to use compared to other ecus'

Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/#findComment-3394494
Share on other sites
kjb_r33 Experienced

kjb_r33

Posted
Posted
hey mate thanks for that, thats first company iv'e seen make a reprogramable ecu for the rb30. and for only $400.

can you tell how youve found the ecu so far, and who would be able to tune it, and how easy it is to use compared to other ecus'

I have had experience with a motec M48, on my previous r33. Obviously with the Nistune system there is no setting up, i think its a breeze to use, and also great value for money. I already had the eprom socket in my ECU so i only had to solder 4 wires to the board, plug the daughter board into the socket and away it goes. I sent matt the bin file from my ECU, he installed it onto the board before sending it to me and car started straight up with same settings it has had since i bought the chip off Ceffie.

I just installed a z32, took 2 mins to reprogram for the bigger AFM, also have a set of GTR injecters coming and they are just as easy.

Download the user manual from his site, pretty well explains the uses of it.

Ken

Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/#findComment-3394585
Share on other sites
R TUNE Mentor

R TUNE

Posted
  • Author
Posted

so all i should have to do is wire up the few wires required as i have a stage 2 chip all ready soldered in (soket type)

look's like i might give it a try then defently should be easy to use from what your saying. so if i had it then was to add a custom cam xf throtal body GTR injectors and gtr fuel pump i could do all the tuneing my self. sounds good esperly for $400

Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/#findComment-3394912
Share on other sites
R TUNE Mentor

R TUNE

Posted
  • Author
Posted
www.adaptronic.com.au is what I used to run on my R33.

Only reason I don't now: I'm selling the car, keeping the ECU to use on the next car.

hey mate had a look however the system is not suited to the R31 so thats out.

Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/#findComment-3394954
Share on other sites
kjb_r33 Experienced

kjb_r33

Posted
Posted (edited)
so all i should have to do is wire up the few wires required as i have a stage 2 chip all ready soldered in (soket type)

look's like i might give it a try then defently should be easy to use from what your saying. so if i had it then was to add a custom cam xf throtal body GTR injectors and gtr fuel pump i could do all the tuneing my self. sounds good esperly for $400

yep

Edited by kjb_r33
Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/#findComment-3395888
Share on other sites
R TUNE Mentor

R TUNE

Posted
  • Author
Posted
Why is it not suited to the R31?

They run the same motor as the VL yes?

And I know the Adaptronic is on a VL RB30

according to thier web site they are nnly makeing them for the rb25 eng + some i may be wrong but thats what i read

Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/#findComment-3397684
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • R33_Guy
      Speed Sensor replacement

      By R33_Guy · Posted

      Thank you so much for the help
×
×
  • Create New...