Jump to content
SAU Community

Recommended Posts

Cara, KYB Excel G is what you want. Speak to the guys at Car Torque on North Tce Kent Town. I got KYB's for my 33 they are fantastic and shouldnt cost much at all. They should be fine with your king springs

Yeah, at the **old** age of 27, I think my days of hard drinking are over, and I proved that yesterday. Still enjoy a social few but thats about it. Just can't stand writing off the whole next day any more.

Cara, KYB Excel G is what you want. Speak to the guys at Car Torque on North Tce Kent Town. I got KYB's for my 33 they are fantastic and shouldnt cost much at all. They should be fine with your king springs

cheers lee, how much did u pay for yours???

Cara, from memory it was about $600, but 34 may be different.

I actually got a better price from SA Suspension Centre (ween Rd Pooraka) but got Car Torque to match the price as I liked their service better. See how you go :thumbsup:

After heaps of talk on pod filters and the ASM test which claimed that the 3A Racing filters came out on top...has anyone actually used the 3A filter since then ? How do they seem in quality, are they the dry unit or need oiling etc ? Never got a chance to take a look at 1 in real life but im keen on trying them out ($25 each lol).

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...