Jump to content
SAU Community

Recommended Posts

wow wish i could quit mine!

do it!!!!

nothing like a little peer pressure, I've been getting it on my phone from a few influential people

don't do it unless you have somewhere else to work

have to say i'm getting the "am i doing the right thing?" feeling now

ah what size is it

I think something like a 3inch pipe with a 4-4.5inch tip. havent really mesured yet. all stainless to.

Hope i get it all done tomorrow, wouldnt mind hearing how it is in the tunnels hehe

Hey Pete its ceramic and after 5,000 rpm it sounds like a supercharger whistle so now I'm not boosting @ all and I've taken as much boost out of the manual controller as i can so its basically running factory boost to which i'm not using trying to drive on 0 or neg vacuum

Hey Pete its ceramic and after 5,000 rpm it sounds like a supercharger whistle so now I'm not boosting @ all and I've taken as much boost out of the manual controller as i can so its basically running factory boost to which i'm not using trying to drive on 0 or neg vacuum

Sounds like you've lost a little bit of the impellar which probably just shot out of the exhaust.

I wouldn't be doing too much driving if I were you because the blades can get fairly unbalanced and shatter now.

OK if the pieces shoot straight out your exhaust.......not OK if a piece gets caught between an exhaust valve and seat.

oh what happens then and when I'm on negative vacuum my understanding is the turbine isn't spinning?? :(

Wouldn't have thought it would stop spinning altogether but as long as your under boost I can't imagine the thing would fly apart.

You would think that the ceramic has gone but you never know, it could also be something else?!

Hey Pete its ceramic and after 5,000 rpm it sounds like a supercharger whistle so now I'm not boosting @ all and I've taken as much boost out of the manual controller as i can so its basically running factory boost to which i'm not using trying to drive on 0 or neg vacuum

My old 32 was doing this about a day before the rear tubine let go and lodged itself in my cat, as SLED said i really wouldn't wanna drive the car that much cause it sounds like the turbo's close to death

yeah I'm doing barest minimum with 0 or little boost

when mine blew i was in town and had to drive my car to woodcroft to my mates to fix it, was a f__ked drive with no boost trying to get up south road

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...