Jump to content
SAU Community

Recommended Posts

Yeh but when you had a GTR i bet those rims weren't 8in wide, more like 9in wide!!

Whens the new R coming Andy?? Thought you would have seen the light and gone for a Porsche!!

yah stock BNR34 has 9"

and in May-June

how the hell does that bike work with no hub? im just stupid i guess and cant work it out :banana:

Single left side swing arm mounted on an external large hub bearing setup.

Billy Lane from Melbourne, Florida USA was one of the first guys to come up with that concept.

2007 Darwin Award Winners

Here is the glorious winner:

When his 38-caliber revolver failed to fire at his intended victim during a hold-up in Long Beach, CA , would-be robber James Elliot did something that can only inspire wonder. He peered down the barrel and tried the trigger again. This time it worked.

And now, the honourable mentions:

The chef at a hotel in Switzerland lost a finger in a meat-cutting machine and, after a little shopping around, submitted a claim to his insurance company. The company expecting negligence sent out one of its men to have a look for himself. He tried the machine and he also lost a finger. The chef's claim was approved.

A man who shoveled snow for an hour to clear a space for his car during a blizzard in Chicago returned with his vehicle to find a woman had taken the space. Understandably, he shot her.

After stopping for drinks at an illegal bar, a Zimbabwean bus driver found that the 20 mental patients he was supposed to be transporting from Harare to Bulawayo had escaped. Not wanting to admit his incompetence, the driver went to a nearby bus stop and offered everyone waiting there a free ride. He then delivered the passengers to the mental hospital, telling the staff that the patients were very excitable and prone to bizarre fantasies. The deception wasn't discovered for 3 days.

An American teenager was in the hospital recovering from serious head wounds received from an oncoming train. When asked how he received the injuries, the lad told police that he was simply trying to see how close he could get his head to a moving train before he was hit.

A man walked into a Louisiana Circle-K, put a $20 bill on the counter, and asked for change. When the clerk opened the cash drawer, the man pulled a gun and asked for all the cash in the register, which the clerk promptly provided. The man took the cash from the clerk and fled, leaving the $20 bill on the counter. The total amount of cash he got from the drawer... $15. [ If someone points a gun at you and gives you money, is a crime committed?]

Seems an Arkansas guy wanted some beer pretty badly. He decided that he'd just throw a cinder block through a liquor store window,

grab some booze, and run. So he lifted the cinder block and heaved it over his head at the window. The cinder block bounced back and hit the would-be thief on the head, knocking him unconscious. The liquor store window was made of Plexiglas. The whole event was caught

on videotape.

As a female shopper exited a New York convenience store, a man grabbed her purse and ran. The clerk called 911 immediately, and

the woman was able to give them a detailed description of the snatcher. Within minutes, the police apprehended the snatcher. They put him in the car and drove back to the store. The thief was then taken out of the car and told to stand there for a positive ID. To which he replied, 'Yes, officer, that's her. That's the lady I stole the purse from.'

The Ann Arbor News crime column reported that a man walked into a Burger King in Ypsilanti, Michigan, at 5 A.M., flashed a gun, and demanded cash. The clerk turned him down because he said he couldn't open the cash register without a food order. When the man ordered onion rings, the clerk said they weren't available for breakfast. The man, frustrated, walked away. [* A 5-STAR STUPIDITY AWARD WINNER]

When a man attempted to siphon gasoline from a motor home parked on a Seattle street, he got much more than he bargained for. Police

arrived at the scene to find a very sick man curled up next to a motor home near spilled sewage. A police spokesman said that the man admitted to trying to steal gasoline and plugged his siphon hose into the motor home's sewage tank by mistake. The owner of the vehicle

declined to press charges saying that it was the best laugh he'd ever had.

In the interest of bettering mankind, please share these with your friends and family... unless of course one of these individuals by chance is

a distant relative or long-lost friend. In that case, be glad they are distant and hope they remain lost.

*** Remember... They walk among us!!

just a front bar is 1200 for R33 and 1200 for 4door side skirts good find but :)

bit pricey

i think paying that much for original kit etc is pritty reasonable atleast you shouldnt have any problems lining it all up and + its impul brand so you pay for the name i guess.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
    • Yeah the rule of thumb with an LS is 7psi per 1000rpm. That is decidedly not enough at 6800rpm. I mainly looked for the scenarios where knock started to be picked up and it was later in the session when things were hotter, and oil was thinner, and the pressure was lower than it should be. (i.e very horrible). I am hoping with thicker oil (I was running Penrite ten tenths 10-40, the manual specifies 10-30) that does not leak that it's much improved at that time!!! I am using Project Mu Club Racer CR pads. I'm also using the Project Mu 335C fluid. The symptoms imply that it was fluid that boiled, but no bubbles seemed pretty weird to me when I bled it today. I want to try Castrol SRF as it has a much higher wet temp but, well, I have new Project Mu fluid lol... so I should at least use that. The pedal on track was really noticable. It went from basically normal feeling to instantly near-floor. The car did pull up as before, it was just very much nearly at the floor before the brakes engaged. At that point I pretty much decided the day was very done, it did *kinda* come back during that very slow cooldown lap into the pits. Felt perfectly fine driving home.
    • f**king around with the bro
×
×
  • Create New...