Jump to content
SAU Community

Recommended Posts

we'll as i told the person that gave me this i will put it up for them but i don't get or agree with tatoo's but hey each to there own

i got given this yesterday buy Ric's Auto Perfection's hairdresser

post-13315-1206750698_thumb.jpg

Might check 'em out. I need some more ink work. Wanna get some tribal done to mate in with my existing tatts from shoulder blade to arm and half chest ... then the other side done when I recover from that work :D

Just on that note: I had my last tatt done a fortnight or so ago when I was healed enough from my broken shoulder. They were like "are you sure?". I'd already delayed the appointment by 6 weeks, because I made the booking and had my crash the day before my tatt appointment. The shoulder bothered me none. :D

Edited by RubyRS4

this looks like a good toy to play with :D

7b.jpg

The key elements of this design are a powerful 23CC engine, with a WT-630 carburettor and double wishbone suspension with adjustable arms. These complement each other for superior performance and almost unequalled turning power. Watch as it grips the dirt with amazing traction!

I know bro :)

I just dont know if I can be f**ked doing it ATM.... Need new injectors, Z32, RB25 gearbox and therefore new tailshaft, new/rebuilt clutch, want to change the fuel system as well (044 or 2 x 910's and a 2.5 ltr surge tank).... Think Ill just retune my current setup, make a solid 200 and be done with it.

And then spend more money on the corolla/ :D:D

and code for your signature

[url="http://www.skylinesaustralia.com/forums/Sale-t143697.html&view=findpost&p=3756525"][color="#FFA500"][size="4"][center]>>For Sale GTR (GTT & GTSt) Parts<<[/center][/size][/color][/url]

will look like

>>For Sale GTR (GTT & GTSt) Parts<<

Me? nah, was too busy trying to get the R31 to even run. :worship:

I f**king hate the RB coilpack setup. Im going forward facing plenum and EA falcon coilpack, simply so I dont have to f**k around with it anymore.

AU you mean

AU you mean

Is it? I thought it was EL/EF/AU you could use too.....

EDIT - Nope, Just AU falcon I believe......

Meh. Whatever. All I know is I want either lead on plug or quick-release coilpacks :P and no valley cover/J Pipe.

f**king sick of having to remove everything to get at the plugs. Maybe Ill make a new pipe that curves back right after the throttle body and goes along the top of the inlet cam.

Maybe Ill chuck a rotor in it. Plugs are on the side then :D:D:D

Maybe Ill just burn the f**ker to the ground..... Im over it. :worship::):/

Edited by R31 drift pig
Is it? I thought it was EL/EF/AU you could use too.....

EDIT - Nope, Just AU falcon I believe......

Meh. Whatever. All I know is I want either lead on plug or quick-release coilpacks :P and no valley cover/J Pipe.

f**king sick of having to remove everything to get at the plugs. Maybe Ill make a new pipe that curves back right after the throttle body and goes along the top of the inlet cam.

Maybe Ill chuck a rotor in it. Plugs are on the side then :D:D:D

Maybe Ill just burn the f**ker to the ground..... Im over it. :worship::):/

dibs on the good bits before you torch it

Everything has a price..... and if I was to strip it, 99% of everythig in it would be going into the new car :) ie. S13/cefiro...... or AE86 LOL

Nah, not going to torch it. Just a little frustrated and lacking enthusiasim atm. Got such a long way to go.

Maybe Ill chuck the Rb20 into the corolla :/:P:D

Nah, she'll be ok, just have to get off my ass and do some work. :worship:

Anyne interested in a Trust TD06 20G 8cm on a DMAX japan Stainless manifold?

Big f**k off turbo on a RB20 (250kw's on 1.1 - 1.2 bar) and super responsive on a RB25....

Are you serious or just messing around???

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...