Jump to content
SAU Community

Recommended Posts

044 Intank is quite easy.

R32:

044 from Motor Tranders for $260 (mentioned I can purchase one from SAU for $250 ish delivered so they did their best to price match)

2 brass barbs and some suitable fuel hose from Pirtek.

Have the pickup brass barb machined on a lathe (boostworx did mine) so you can use the standard sock.

2 large hose clamps

Put it together dropped in tank easy as. :)

Its a fair bit harder to fit in the R32 as there's not much height available in the tank and requires machining of the pickup barb. The 33's are dead easy to fit the 044 pumps intank.

The pump has a nice buzz to it; as loud as my old VS 5ltrs pump. BUT when the weather warms the pump gets a little loud from outside; inside its still fine.

i wouldn't say dead easy on a 33, intank was a pain in the bum, if you want to get a decent amount of fuel out of the bottom of the tank its a pain in the arse. Because the pump is a larger diametre and the bottom of the tank closes up towards the bottom it can prove a pain in the arse getting the rod and to clip in the bracket, not cutting your arms up at the same time can be hard.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • IMG_6023.mov   In motion 🤙
    • If we're going after market gauges, I'm a big fan of Australian made... Get some RedArc!
    • Unless you're fortunate enough to buy a newer car, getting an older style plate to match your name/car is difficult because they've already been purchased.  Unlike other countries, personalised plates are locked to the country and not region, so there can't be multiple versions of the same plate but with a different area code.  Hope that helps
    • People use the numbers to make it look like letters to spell words/names, which is where the illegal spacing comes in. For example this GR Yaris  
    • Today's rock removal from my stock pile out the back into a 4m³ skip bin, I still have a bit to go, hopefully there's enough room in the skip bin, it will be close My daughter and her boy was coming on Sunday to help, but, I got possessed by demons and started work as soon as the bin arrived at 1230 today Lots and lots of barrow loads were achieved  Currently I'm sitting on the lounge drinking beer thinking of how I should have waited till Sunday for some help, tomorrow will be a day off, in saying this, my day off will involve prep and paint of my alloy coolant and PS tanks with wrinkle paint (Jackie is in Sydney till Sunday so the home oven will get a run curing the paint....LOL)
×
×
  • Create New...