Jump to content
SAU Community

Recommended Posts

Something like this Steve?

edit. ughhh can never get ebay links to work. Found a better one, but as i have factory Xenon headlights, will i need a HID kit? Theres on on ebay for $73.99 posted.

Edited by Damo_R34
thats wierd isn't it....I wonder if that's more the exception than the rule....what happens to the bits when they do fly apart then?

One theory could be that due to the cam ovtserlap the bits make their way through the inlet then straight out of the exh valve before the bi get combusted.....poor cats if that is the case!

My thoughts are its most likely as you say cam specs but I can't see the ceramic going back in to the inlet UNTIL you jump off the throttle. Could also be something to do with the smaller turbo; turbo being closer to the ports with a direct path unlike the log manifolds.

i work tomorrow and monday!! so no chance of making it down there!! or anywere that means! so after hours job! lol..

can i borrow someones then get one tuesday from u steal it then give it back?? hehe

How much it set you back champ?

$300 for resonator, $200 for fitting and the junBL's were from the forum here for $450 for the pair (but they originally came from exh tech anyhow)...

Probably gonna get custom dumps, a barrel muffler and a high flow cat from them once I get my new turbos...

-D

Well i currently have a friend painting my skirts and rear, but he will be a bit busy before now and autosalon with my stuff, so ill look for someone to paint and fit it for me before August 8th hopefully :banana:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • If there's oil in with the clutch, I hope it finds its way out even if that hole has a cover/grommet 😛 I don't want oil near my cars clutch! 😛 Interested to hear the answer about covering it, I'm assuming a bung for a gearbox from another car that has a grommet to suit.
×
×
  • Create New...