Jump to content
SAU Community

Recommended Posts

Has anyone changed the dash globes on a 32??? I have brought blue LED ones and was just wondering how long they take to fit???? might try and fit them today :D

took me around 3 hrs the first time I did it, 2 hrs the second time... also stripped my dash out yesterday which took 3 hrs to disassemble and around 2hrs to get 1/2 of it back on... its not too hard but if u have problems, send me a tell. worst comes to worst u can buy me booze and I'll do it for ya ;P

-D

anyone know when changing gearbox oil do you need to replace the filler and drain plug with new ones?

thanks Luke

dont need to replace the plugs unless the old ones are shagged. if still in good nick just clean the magnet and plug.

thanks to damo and chad about the jobi congrats. means alot! im scared as hell, start tomorrow working for a company called maison design as an all rounder.... called up friday, interview saturday, trial monday!! haha awesome!

http://maisondesign.com.au/

lol @ dohmar's lack of dash! looks hectic!

chad! we want pics!! :( havin fun getting intimate with your cluster?

hahaha yeah i know!! every little thing possible should be done in the first week to impress the boss! haha

thanks for well wishes! all helping me to amp up for the big day...... sorta like a dream place to be working

just got my dash led's working again steve...

i by-passed the dimmer knob (soldered the wires together)

and noticed there were still 2 not working, i mucked around with them switching them around, and now they all work!

its been a while since i have seen that!

i did notice one of the led's had melted though :(

meh, it still works, i just ordered white ones lol

Well I've got a bit of a head ache at the moment. I sold a diff to one of my mates and I shimmed it up and fitted it today, and after I had it in I was positioning it to line the bolt holes up and it fell out onto my head. For those who have picked up an R200 they would know they aren't that light.

So now i have an egg on my forehead the size of an actual egg.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...