Jump to content
SAU Community

Recommended Posts

hows this hyundai wanted $234.34 for an injector for a 2000 hyundai accent, stanvac auto wreckers will give me one for $30 lol. :thumbsup: now i just have to put it in haha.

I paid $330 for a genuine GTR injector from Japan! I needed 6! Ended up costing me like $2200...

I could have bought a Hyundai Excel for that haha

totally.... u can get sard 800cc's for $900 or something on the GB section... crikey

-D

Haha yeah I know, my mechanic told me that he could get a full set for that + a tune! But I need a ECU which isn't on the cards at the moment.

But it really is the going price for the genuine injectors. I rang up Nissan, and they told me $360 each. Apparently the GTR injectors are becoming more sought-after now due to the fact that most of the older model GTR's injectors are begining to leak.

But, 6 new injectors later, the GTR's running alot better and no more fuel smell!

Crickey you can get sard 800's for a little over 600 your all getting ripped off

and go see a new mechanic because someone like Jeff from the speed lab could of remaped your standard ecu and you still had change for a beer from $900

hahaha google street photo taken when my car is not home :thumbsup: though i did want to see it

Yeah I checked my house first and there wasn't any cars home, so I did the following:

lol k i checked my house my old work and my new work and my mates house and its not there ether...haha im checking the x's house now lol,seriously tho where the hell was i on this day!

:ermm:

Yeah, lobethal was done around the time we had that heat wave, and some parts of Nairne were done at a later/earlier time in the year, as it's all cloudy and shit in the pics (the loby pics are fkn sunny as, with dead grass every where :P)

Sard injectos and an ecu remap for $1000 you say? Not bad. Think its the actual injector leaking, not because of the o ring... Can actually see fuel running out :S not much, but enough.

That's exactly the issue I had. Shaun was saying how alot of the 32 GTR's are doing this now with the stock injectors. I had 2 leaking, though and the others were on their way to that point.

You get a bad fuel smell, too. Everywhere I took it, people would say "you've been giving this one a flogging!! I can smell the fuel still!" haha

Yeah, lobethal was done around the time we had that heat wave, and some parts of Nairne were done at a later/earlier time in the year, as it's all cloudy and shit in the pics (the loby pics are fkn sunny as, with dead grass every where :P)

(virtual)drive down the main street of barker, just after the bike shop its sunny, then move ahead one spot and its dark, wet and cloudy. haha.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Not really, but the heater box is pretty simple mechanically....if the door is one way the air bypasses the heater core and if it is the other way it goes through it for warm air.  If you are sure the actuator you moved manually is for the heater mix (there would also be one for output air direction) then I'd take the heater box out and see what is happening (you'll have to regass and re-coolant the systems afterwards) BTW pp724 onwards from the GTR workshop manual cover the system in good detail, it is probably worth checking. I think the IAT sensor might be a problem electrically for getting cold (if you got 24 error code not -24 it thinks the incoming air is -50c) and it covers how to test the sensor (although most likely it is either not plugged in or a wire is damaged)
    • Use the GKTech subframe bush and bring your subframe 10mm closer to the chassis. You'll need to fix an exhaust hanger to suit. One of the best mods I've done.
    • You'd really have to pull it apart further to know, it least you can be confident that the one heading to the back is not connected any more. There was once a ground on the shifter seal mount too, your head unit issue could be that simple
    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
×
×
  • Create New...