Jump to content
SAU Community

Recommended Posts

Edited: ah k cool i'll have to give em a call soon

how long does it take to re-tune/remap the ecu??

honestly, it depends on the equipment provided, the availability of the software for that particular hardware, at least a couple of hours to run the calibration and do the actual tune.... my initial tune cost something like $700-800, i honestly cant remember. it was done when i replaced faulty o2 sensors.... has been an absolute JOY to drive... hasnt got the KW numbers to impress dyno whores, but i really love this particular tune. it'll be better in 6 months when i get new cams and turbos, but i'm very happy with the tune. it gives me a perfect balance between performance and reliability... with the emphasis on reliability (as directed by yrs truly)....

I cannot recommend those guys enuff. They have leet skillz.

-D

If you are going for a remap you would have to go to Jeff, he was one of the first in Australia to do remaps and he is definitely one of the best, and as for cost he'll be around the $500 mark but every tune is slightly different, and touch up tunes are a fifth of that

If you want proof of his work he was the one that kept this standard RB20 together when it was making 370rwkw.

http://www.skylinesaustralia.com/forums/Tu...p;hl=Turbo+Tune

EDIT!!

His number is; 0434637357

Edited by D_Stirls
He just brought it back to my work to show me... its fairly tidy!! i made it clear i have a husband :P

WHAT!? you never told me you have a husband! and here i was thinkin i was in with a chance.... :)

hehe, just kidding :) im pretty sure that was in the first message you sent me :angry:

seeing a 260RS at the bank just before i picked up my stag made my day :angry: good to meet you Nene :angry:

i'll have to clean it tomorrow (technically today now) and take some photos to show :angry:

Peace!

Aaron

RANT #1

Just had a meeting with one of my admin staff and gave her an official warning today. Pull your socks up or walk. I been doing more drafting work for the office and need to hand over some of the bookkeeping tasks, but she's f**king it up and blaming the system not working. Its been working for the last 9 years bitch!!! And being the office manager and having built this office ground up 9 years ago, I take that as an insult from someone with no qualifications/diploma/degree. She had a whinge to the #1 boss yesterday and he spoke with me yesterday arvo. He knows there is nothing wrong with the system we use, but rather the user (her). We both agreed she needed to be warned. This is not the first time she's messed up. She's been verbally warned a few times over the last year. She's even got a bit of a rude attitude on the phone at reception. When you're dealing with lawyers and Councils and Government departments as much as we do, you can't be rude to them. (she talks to them like they're telemarketers)

I've gone and hired and started training another admin staff member in the bookkeeping side of the office. She's obviously noticed that and sees her as a threat. So what. The new trainee bookkeeper will be taking over her jobs to do with the financial side of the office and she'll be limited back to general office typing and filing. Its my job as the manager to allocate the best resources anyway, so thats what I'm doing.

RANT #2

Crazy John are idiots.

Vodafone are bigger idiots.

Got sick of Crazy John and sent to Vodafone because all I hear are good things about them (mostly). so I sign up and transfer my existing number over. Nothing. Phone's not working.

I've been without a working phone for a week now. They were supposed to "port" my existing number over onto the new SIM card and f**ked it up. I rang over a dozen times in the last week to get it resolved, but nearly everytime I was put thru to customer service I was put on hold then the given the 'hang up' tone as the line was disconnected about 4-5 times. The 4 or so times I did get thru I was firstly reassured the problem would be resolved in 3 hours if I turned my phone off. Nope.

Finally called yesterday and gave them a mouthful. Immediately asked for someone who's native language is English. Explained it to them again and informed them that if they hung up on me again, accidentally or otherwise, I'd take my business elsewhere. I've been without a working phone for a week and I need my number for work. I can't send/received messages or calls. Told the line again about something f**ked up during "porting" my number and the techs are trying to fix it. Said it could take a few days. I told them that was unacceptable, I want to speak with the customer service manager. Put onto their supervisor, said "no" I want their manager. Spoke to the manager and explained the situation and how unimpressed I was. Said I didn't care to be treated on the same level as pimple faced teens who desperately want to text their stupid boyfriends ... my phone is required for me to make a living, as well as social reasons. Informed I would now be treated as a priority.

Finally, my phone is working again today. Now I gotta catch up on work. :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...