Jump to content
SAU Community

Recommended Posts

snapped a bolt in the f**king shit ass just jap cooler were the brackets mount coz the crap quality SHIT..

did the same on mine when i tightened the bolt up. its not the cooler thats shit quality, its the bolts they supply

lessons learnt when buying cheap stuff, always replace the bolts with good stuff

morning all :)

one more weekend till i can clear out my wardrobe and put all that damn stereo gear into the patrol :bunny:;):D

Can someone who has a R32 or 33 Manual do me a favour?

In the Service Data and Specifications for the braking system (at the end of the Brake section) there is a Split Point in kPa and a reduction ratio in the Data for the Brake Master cylinder. For the S13's it's: 3.932 (39.2, 40, 569) x 0.4.

Could some one let me know what they are for either an R32 or R33.

Thanks

took my turbs off, turns out its a hi flowed vg30.

good nic too.

captain thread comes out monday, then i gotta put it all back together....

GO THE HAWKS!

checking shaft play is only half of the story about telling whether a turbo is in good nick or not, Another way of checking is actually looking at the whole rear wheel of a turbo, a mate recently bought a gt3540 off a typhoon from ebay, shaft play was in top shape, and the wheels looked fantastic, Taking the rear housing off told a different story. The whole rear of the wheel was chewed away leaving a very f**ked turbo. from the outside the wheel looked to be in top shape. Obviously your is fine craig lol i just wanted to tell a story lol.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • If there's oil in with the clutch, I hope it finds its way out even if that hole has a cover/grommet 😛 I don't want oil near my cars clutch! 😛 Interested to hear the answer about covering it, I'm assuming a bung for a gearbox from another car that has a grommet to suit.
×
×
  • Create New...