Jump to content
SAU Community

Recommended Posts

Took a sickie today.

Didnt get up until 12 noon. Now I've been bored all day. :P

Would have been a great day to ride thru the hills ... but I'm too sick to ride :P

evening everyone.

So i did a good deed just now.. saw a dead cat on melbourne street n felt sad so i turned around and stopped and helped another lady drag it off the road.. poor kitty :P

Im a sucker for animals :P

Felt sad so decided to give my cat a hug when i got home, all i got was a scratch on the face and a hiss.

But yeh, theres my good deed for the week

um when i saw him run on the saturday he made 285 AWKW and 301 RWKW i doubt from one day to the next hes going to loose 30 awkw's :P

tiz true.. when my car ran on saturday they also diddnt put enough petty in.. had below 1/4.. might have something to do with it.. i dont know.. was workin sat :P but what i do have is the figures of previous tune results.. can scan in dyno sheets if need be. thanks for the comments and smiles bout engine.. yeh im pretty happy visually with it too...

chad, yeh just had to chuck the trophy in there.

post-27156-1224592648_thumb.jpg

G zilla back with mozilla :(

special thanks to dohmar for his pc skills

plug in for the man who don't like to self advertise;

for all your pc fixing needs contact dohmar :P dude hooked me a sweet custom made pc running a twin turbo nos setup to smoke any rival pc.

pm dohmar to get him to hook up your busted pc today :P if he's not too busy running up his credit card and changing the lights inside his dash to the 5th colour he's had

Edited by Inline 6
um when i saw him run on the saturday he made 285 AWKW and 301 RWKW i doubt from one day to the next hes going to loose 30 awkw's :blink:
tiz true..

:)

would look pretty defectable personally 18's are enough and once you go to a 19" tyres whoa mumma prepare to pay for rubber

Even the jump from 17" to 18" is a big jump in price unfortunately :P but yeah, i recommend 18"

went and had my car remapped at turbo tune today and i gained 34 rwkw out of it

first run pulled 88.1 rwkw with a blocked fuel filter and fooked fuel pump..so replaced both of them and it pulled 111.2 rwkw

then after the remap it pulled 122.2rwkw..

im pretty happy with it considering the only mods are HD clutch, 2.5" full exhaust system with race cat and K&N panel filter

Ryder, hurry up and get a turbo!!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Wanted to add some of my R33 GTST  R34 GTR wheels, 18x9 ET30 with 255/35/R18 PS4S'   BBS RE-V7 029 18x9.5 ET22 with 255/35/R18 PS4S' Needs a bit of camber   
    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...