Jump to content
SAU Community

Recommended Posts

I'm glad my spending money on mods is drawing to a close I think. It slides reasonably well for what it is now, works better than the sum of it's parts you might say. I reckon a clutch and maybe some sway bars is all I want mod wise now. The rest is just tyres, fuel and oil changes (and fixing shit if/when I stack it again :thumbsup:)

you have good taste, but i personally think the F4 is getting a bit long in the tooth. It certainly is a beautiful bike and one of the best Tamburini has designed but the rear needs some work, it's a tad to fat for my liking, and the headlight area needs attention. Hopefully with some cash from harley davidson they can launch the next all new model.

Also i personally find it hard to justify the extra cost for the MV over say my bike. Yes i know mine isn't as coverted or "unique" but for the money nothin beats a japanese inline 4 sports bike!

Its all opinions and tastes tho. I like the styling of the rear end of the F4 except the 4 pipes. They just look too ... "matchbox car" ... if you know what I mean. I definitely like the headlight styling. but ultimately, I bought myself the F4 Brutale, because there was no fairing to hide all that fine work into the build.

I think, for the base models, the prices are fair. Remember, you're buying an Italian bike with a Ferrari engine. A new model GSXR is $18K and the F4 1000S is $26K.

but I agree that when you look at the model range upwards ... its about $31K for the 312, no idea on the 1078 but guessing about $36K (in line with the Duc 1098), and $70K for the Tamburini.

At the end of the day, the Brutale is there to satisfy my taste for Italian machinery. I have my Suzuki TLR1000 and I prefer that bike anyday over the Brutale. I've had it 7 years now, and will have it 7 years after the Brutale is gone. Each bike/manufacturer has different qualities to offer in a motorcycle. The brutale is the girl you flirt with at parties ... the TLR is the whore you take home and bang all summer long!

:thumbsup:

didnt get my baby back today..soo hopefully tomorrow otherwise gona lose my sh*t lol

and hopefully my boost gauge arrives in the post tomrrow too

so much hoping going on now hehe

BOYS AND GIRLS SELLING YOUR CAR BE CAREFUL WHEN LETTING A PROSPECTIVE BUYER TEST DRIVE YOUR CAR!

nav_m.gifRuffls S15 Stolen!Options menu_action_down.gifuser-online.png<A href="http://www.skylinesaustralia.com/forums/Ruffels-m17884.html">Ruffels ipsmenu.register( "post-member-4218791", '', 'popmenubutton-new', 'popmenubutton-new-out' ); to_post_off.gif Yesterday, 05:06 PM

Post

#1

av-17884.jpg

RUFFLS

pip.gifpip.gifpip.gifpip.gifpip.gif

38.gif

Posts: 1,212

Joined: 2nd March, 2005

From: Melbourne

Car(s): 01' s15 200SX

Real Name: Mark

Trader Rating : 9

spacer.gif

Please keep an eye out for an Aus Spec 2001 S15 200sx in Pewter with number plates 'ruffls'

it was forsale and was stolen right in front of me while on a test drive...

i was out of the car for 1 second at a petrol station on todd road (the onramp to westgate bridge)

and the guy test driving the car drove off!

any information please call me on 0408 569 685 or ring 000

car was stolen at 3:30 this afternoon

thanks

-Mark

--------------------

Well, I posted a thread in the cosmetic section, but I'll put something here too, one of you guys might be able to help me out :thumbsup:

I need to get rid of this:

image039av9.th.jpgthpix.gif

Any ideas on how to go about that?

cut and polish maybe ?

autosol ? (i know its a metal polish but its magical)

Its all opinions and tastes tho. I like the styling of the rear end of the F4 except the 4 pipes. They just look too ... "matchbox car" ... if you know what I mean. I definitely like the headlight styling. but ultimately, I bought myself the F4 Brutale, because there was no fairing to hide all that fine work into the build.

I think, for the base models, the prices are fair. Remember, you're buying an Italian bike with a Ferrari engine. A new model GSXR is $18K and the F4 1000S is $26K.

but I agree that when you look at the model range upwards ... its about $31K for the 312, no idea on the 1078 but guessing about $36K (in line with the Duc 1098), and $70K for the Tamburini.

At the end of the day, the Brutale is there to satisfy my taste for Italian machinery. I have my Suzuki TLR1000 and I prefer that bike anyday over the Brutale. I've had it 7 years now, and will have it 7 years after the Brutale is gone. Each bike/manufacturer has different qualities to offer in a motorcycle. The brutale is the girl you flirt with at parties ... the TLR is the whore you take home and bang all summer long!

:)

I agree with most of what your saying except for two things, i think the pipes look horn on the f4. And the "ferrari" engine does nothing for me. My bikes mill puts out more horsepower and torque across the board, so the advantages of "Ferrari" engineering seem wasted to me.

I agree with most of what your saying except for two things, i think the pipes look horn on the f4. And the "ferrari" engine does nothing for me. My bikes mill puts out more horsepower and torque across the board, so the advantages of "Ferrari" engineering seem wasted to me.

You haven't ridden one yet have you? ;)

The engine (including the tuning) is brilliant! There is no snatchiness of the throttle whatsoever. It doesn't have mountains of power or mountains of torque, but what it does have it delivers smoothly and where the power should be. No jap bike I've ridden yet is as smooth as the F4 engines are. Thats the Ferrari influence there. The gearbox is brilliant also. Snips into gear easily, even under hard acceleration and without clutching. I've found most jap boxes clunky. Clutch feel is precise and smooth and easy to measure when powering off hard. Don't be fooled by the race for big power in bikes ... look closely at the delivery of that power to the rear rubber. Big power means nothing, if it is a pig to ride and if it upsets the handling of the bike. Even the newer jap hyper machines still are not smooth to ride. The MV is so smooth that abusing it will not upset its stability.

Oh ... and no other bike has that 'flutter' note to the exhaust like the MV :) But in the end, she's the flirt, not the whore.

Edited by RubyRS4

just got my saber boost gauge in the mail :) but just wondering there is an air filter that goes between the pressure source and the boost sensor box..do i have to put it in coz wouldnt it be a restriction and show a lower boost reading with it in???

Nah it was a delammed tyre Steve, the strands of rubber were flailing around giving the guard/door a good hiding :)

I got some wash/polish onto it and it cleared 99% of the marks away, I was pretty surprised no cutting needed.

While I was there I washed the whole car and it looks fking amazing now, for a trashed drift pig ;)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...