Jump to content
SAU Community

Recommended Posts

how much for the n1's? my car needs a chrissy present

If your interested in a cheap pair of N1's mine will be coming off over christmas cause im upgrading to Garretts... only thing the seals need replacing on em as oil is getting on my manifold... so if your interested jus send us a pm if not i'll jus post em up in the for sale section.

yeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeehhhhhhhhhhhhhhhhhhhhhhhhhhhhhaaaaaaaaaaaaaaaa

aaaaaaaaaaaaaaaaaaaaawwwwwwwwwwwwwwwwwwwwwwwww

Just got my 34 back from the workshop. Took it there to replace the water pump, and not only does my car now stay icy cool (old pump was corroded and cavitating badly), but the rattle from my engine bay is GONE! A few of you would have heard the rattly beast on the cruise last week or at bowling a while back - and it is NOT top end issues - it was just the damn water pump. So, no rebuild for me after all!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I am heading down to Vili's to get my calendar at about 7:30pm - will catch up with some of you there

If your interested in a cheap pair of N1's mine will be coming off over christmas cause im upgrading to Garretts... only thing the seals need replacing on em as oil is getting on my manifold... so if your interested jus send us a pm if not i'll jus post em up in the for sale section.

PM sent

yeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeehhhhhhhhhhhhhhhhhhhhhhhhhhhhhaaaaaaaaaaaaaaaa

aaaaaaaaaaaaaaaaaaaaawwwwwwwwwwwwwwwwwwwwwwwww

Just got my 34 back from the workshop. Took it there to replace the water pump, and not only does my car now stay icy cool (old pump was corroded and cavitating badly), but the rattle from my engine bay is GONE! A few of you would have heard the rattly beast on the cruise last week or at bowling a while back - and it is NOT top end issues - it was just the damn water pump. So, no rebuild for me after all!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I am heading down to Vili's to get my calendar at about 7:30pm - will catch up with some of you there

well don't nick off straight away, hang around for a bit & I'll try to get down there to

If there not firing its multimeter time to see if the problem is with the loom or the injector.

i can hear clicking on all of them i think.. i just hope there not f**ked otherwise its gonna get expensive!!!!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...