Jump to content
SAU Community

Recommended Posts

Back from the World Superbikes at Phillip Island. Got back home at 3am this morning ... still feeling the big weekend. Working from 6.00am thru to 6.00pm. Got positioned at turn 1 for "recovery" (of crashed bikes and riders). Did anyone watch the National Supers race and see the 3 bike pile up into turn 1? I was there. 3 riders down, 2 out cold and 1 very pissed off. Good thing it was on the last lap, so the race had ended anyway. Took a while to clean that one up. Biggest highlight of the working weekend.

Biggest highlight of the non-working moments was the big FAIL to Vic police who capsicum sprayed half the pub when a fight broke out. That shit is nasty :P

Anyway, might go to bed again and catch up on more sleep :P

BTW the rear tyre on the Brutale got trashed :P

Edited by RubyRS4

hahaha thats funny as about the gtr stuff.......

thank god i own a non turbo tho :P so much easier but i must admit there was a dude in the N/A... section who said his car was non turbo but he had the Red/White GT Badges and on the rear bar he had a GTT badge..... i have to admit it was quite confusing until he said that the car had a non turbo engine put in it before he brought it. nfi why tho.

Went down to Michaels new shop Carline today. I recommend him, he did my exhaust at Aussies and really knows his shit. Plus he had a few 2jz's laying around, asked if I wanted to throw one in... Has really got me thinking..

ive only rally found the Do Luck ones and the ones that Viva Garage have got...........just spewin that i wont be able to fit GTR fenders on unless i change the bonnet and front bar :P

why does life have to be soo cruel in that way? :P

yeah gtr guards are basically for gtr front end conversion, unless you spend a mint getting them moulded onto standard fronts.

i want something a little wider with a vent, i love the look of the vent.

im not worried about spending the extra money on fitment cause the car will be going in for a full respray next year and ill get them put on when that is getting done....

krishey - u gonna come to loxton for dinner are you??? :P

and nah muirsky not getting new rims - i got them last year lol im really happy with the 19's anyway they look really good especially with this years graphics design :P

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...