Jump to content
SAU Community

Recommended Posts

Yeah I gotta get mine replaced so I'll be lashing out for a set of RDA front slotted rotors too. Theyre not as expensive as I thought they'd be either.

-D

rda are awesome value get a full set of rotors for the same price of 2 dba

Yeah I gotta get mine replaced so I'll be lashing out for a set of RDA front slotted rotors too. Theyre not as expensive as I thought they'd be either.

-D

Just got mine off the SAU group buy, in 4 days.lol

and cheaper for 4 then buying 2 from anywhere else in town

Ben look into the group buy mate

i got a set of 4 for my 33.....$***delivered and was here in 2 weeks

so definately recommend that guy in the GB section

"edited by SLED"

I arranged it last week thru the grp buy.

-D

Seriously?! Yeah!! Slotted are a shit load better than just standard.

Improved stopping distance, improved feel, etc. I even went from a cross-drilled set to a slotted set and noticed a huge difference.

They improve braking power, basically. That and a good set of pads!

Most properly modded street cars, you'll find with slotted rotors. As well as all the HSV's and FPV's that came out the factory, and a few BMW's.

everyone going slotted?

curious, do slotted rotors go through pads faster than standard flat rotors?

Well for me Damo the slotted rotors feel a whole lot better

i havent noticed much brake pad wear but only had them in for like 4 -5 months now

plus i had to go slotted as you can as luke (enr_034) how stuffed my stock rotors were mate

Well for me Damo the slotted rotors feel a whole lot better

i havent noticed much brake pad wear but only had them in for like 4 -5 months now

plus i had to go slotted as you can as luke (enr_034) how stuffed my stock rotors were mate

if anything they make the pad last longer. they do have more bite which increases wear but the groove also assists in cleaning the brake dust off the pad and venting it out so its not actually trapped between the rotor and the pad, and that itself helps the pad to stay alive a bit longer...

You'll still have benefits with cross drilled however many cross drilled rotors are prone to stress fractures due to the fact that they are drilled after the rotor is forged, whereas the slots are actually shaped within the forging/casting process. You'll notice RDA also have the gold passivated rotors with slots and 'dimples'. The dimples are done during casting and dont go the entire way thru the disc, so theyre much hardier. cross drilling isnt so useful for street work (lets face it, its there for cooling so its mainly for racers)... slotted is more than enough for any street car.. if your slotted rotors aren't doing the job on the street, then thats the time you consider caliper and disc diameter upgrades... or switch to a prius

I've already added a cusco brake cylinder brace and braided brake lines and those two improve the feeling/response of the brakes quite a bit. The new rotors should really seal the deal, I can't see myself needing bigger calipers or disc diameter...

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...