Jump to content
SAU Community

Recommended Posts

nero is the problem, even tried burning through windows, still = fail

hahah >insert witty quote about redheads and burners<

sorry but how is nero the problem?

If the burn fails during the procedure, your burner might be faulty.

If you can't even get the file into a filesystem template and prepare the image, then give up and hire a nerd for half an hour. Then sell your PC and buy an abacus.

-D

Dammjust got back from my regency appointment and failed :D.

Got done for tiwsted brake line but it passed the brake test.

6 x 9 speakers in the back so they cut the metal parcel shelf and parkers and low beam on 1 side.

Does any1 know hwo or where i could get to fix/ put in a new metal parcel shelf???

please help

Parked our car in Jetty Road, Largs North on Saturday afternoon.

We had two (2) Port Power season tickets sitting on the dashboard.

Some bastard broke into the car and LEFT TWO MORE!

A rebuilt high flow i would of thought would be better than a 2871

52T 2871 will do 250rwkw and a 56T will do 270rwkw, i don't see a high flow doing that. Garret rate them at 460 and 475 hp at the engine respectively.

Edited by D_Stirls
Parked our car in Jetty Road, Largs North on Saturday afternoon.

We had two (2) Port Power season tickets sitting on the dashboard.

Some bastard broke into the car and LEFT TWO MORE!

Wow.... I guess they couldn't have been true port supporters

after all, you didn't mention that they'd stolen your car radio :D

-D

Dammjust got back from my regency appointment and failed :D.

Got done for tiwsted brake line but it passed the brake test.

6 x 9 speakers in the back so they cut the metal parcel shelf and parkers and low beam on 1 side.

Does any1 know hwo or where i could get to fix/ put in a new metal parcel shelf???

please help

cut metal parcel shelf........you'll be lucky not to get black listed for that (as the parcel shelf is usually part of the structural steel

might be worth checking out what nisswreck can do for you though

heres the question scott, how did you not know your headlight was out? i can pick it on any car i drive (especially at night).........and i woulda checked all my lights before going anywhere near regency anyway

Dammjust got back from my regency appointment and failed :D .

Got done for tiwsted brake line but it passed the brake test.

6 x 9 speakers in the back so they cut the metal parcel shelf and parkers and low beam on 1 side.

Does any1 know hwo or where i could get to fix/ put in a new metal parcel shelf???

please help

are you kidding me for 6x9's ???? that means you could defect a lot of cars in this town. I dont care for 6x9's but that is petty shite , its going to be expensive to fix labour wise unless you can weld, rear window might have to come out just to keep from breaking it ,, that sux big time

try a body shop for install if you dont want to attempt it

anyone have about 20-30cm or so of 3M automotive double sided tape laying around? The tough stuff they use to stick on car trims, etc. NEED some.

superchump doesnt sell the good stuff, not the one down south anyway

you need the red 3M tape , used for trim, call up any auto paint store for it, or rare spares on south rd

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...