Jump to content
SAU Community

Recommended Posts

you could make your own. just buy a regular one, stuff steel wool into a stocking, shove that inside, and adapt a small breather to the top.

*sigh* if only I wern't lazy lol

Might have to do that.... even decent normal CC's are hard to find at a non absorbitant price

Anyone know who sells atmospheric vented catch cans here in adelaide.. they're f**king hard to find

As damo said just make your own;

That's what i have done, Just tapped a thread into the top of the can and then screwed in a barbed fitting and fitted a breather. I also made up some internal baffles and baffled the top of the can where the fitting was screwed in then filled the can with steel wool. the can only cost me $45 from memory.

Image799.jpg

RadO-Tank4.jpg

Edited by D_Stirls
its that good i need a second bag of popcorn
AleviAte7 wrote:Wow.......just joined this site......not sure that was good idea now......

rxbuzz wrote:

Well f**k off then. flamin mongrels like you dont help the situation.

lol

i love being the high bidder on an item from ebay for a whole week, after

putting on a ridiculous bid to make sure i dont get out-bid by 50c (always happens)

lol another trick is someone they know keeps bumping up the price and when they accidently win it themselves the item go's back for sale 2 days later.

post-31501-1239792607_thumb.jpg[

the battle continues, thread now stickied on their forum. ROTARY :down:

http://www.ausrotary.com/viewtopic.php?f=3...031&start=0

lol another trick is someone they know keeps bumping up the price and when they accidently win it themselves the item go's back for sale 2 days later.

post-31501-1239792607_thumb.jpg[

the battle continues, thread now stickied on their forum. ROTARY :thumbsup:

http://www.ausrotary.com/viewtopic.php?f=3...031&start=0

The more i read it the more it cracks me up :down:

IMG_2136.jpg

front coils are in, had a few issues, took a couple hours, but is much awesome. :down:

question for all those coilover users out there though, the cusco's dont have this clip for brake line;

IMG_2134.jpg

is that a big deal?

Edited by scandyflick

"and you are you?"

"we are the bedroom police. we clocked you at 1 min 38"

"i guess that is pretty fast"

"we'll let yuo off with a warning this time, but only if you contact ami"

hilarity :down:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Have you flushed the initial fluid yet? It should look like a rainbow unicorn shat glitter into it. 2nd or 3rd fluid change is when you party.
    • all brand new unit from Tomei, fluid, bearings, etc. Tomei said they call it a 1.5 lsd because its 100 percent lock up under acceleration and 50 percent under deacceleration.  as I mentioned I used their fluid, install and their break-in procedure, (alot of figure 8's) but even when driving straight, or even slowly backing out of garage for first time, (at 2 mph) then driving to and from figure 8 parking lot, each tire in the rear would sporadically grab, skip, bounce, shutter and skip, shutter back a force I could feel causing clutch to slip then grab, at any speed. shaking entire car. I removed unit, since I put stock back in and all is fine, via process of elimination, its something with the lsd unit itself. I wasn't going to beat up the entire car more or change anything else for no reason as I had a feeling something in the lsd itself was wrong as everything was fine before this alone was installed and I rechecked over everything else after first time backing out I suspected an issue. I'll probably sadly already need new tires now just from trying to drive it 5 miles and performing the figure 8 break in. but if someone has any ideas I'm all ears 
    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
×
×
  • Create New...