Jump to content
SAU Community

Recommended Posts

FFS, my RB20 does not like stock bovs and I've got no fking idea whats causing it :dry:

It struggles to get to .4 bar at full throttle. With the bov blocked it makes .8 no worries. Also of interest is that the bov doesn't open properly when it's plumbed in. Opens briefly at full throttle but still flutters like mad otherwise, like it's not even opening. My old 32 would NEVER flutter with the bov plumbed in, like it opened even backing off at 0 boost.

On the plus side it seems pretty controllable to slide, even on stock sus with a weak viscous diff :P

Edited by AndrewJZX100

anyone got a ute/van/wagon etc and wanna earn $20 ??

i need to take my un-assembled bottom end to turbo tune and i dont have a working car !!

reply here or pm me or call me 0419848600

willing to pay more if you have to travel !

could be a leak on your BOV by the sounds of things andrew....

try another stock BOV if you can get your hands on it mate..

Thats what I thought, so I did just that and it does the same thing :dry:

Stock RB20 one does it and stock RB25 s2 that I just bought does it as well. I'm thinking maybe a vac line somewhere might be a bit suspect.

Thats what I thought, so I did just that and it does the same thing :dry:

Stock RB20 one does it and stock RB25 s2 that I just bought does it as well. I'm thinking maybe a vac line somewhere might be a bit suspect.

i would say that if its making the right boost when the BOV is blocked off then just leave it blocked off....Flutter FTMFW

but now it sounds like the vac line from the BOV to the plennum is leaking or something strange is happening

let us know when you find out what the problem was mate

good luck

PS flutters man leave it fluttering lol

anyone got a ute/van/wagon etc and wanna earn $20 ??

i need to take my un-assembled bottom end to turbo tune and i dont have a working car !!

reply here or pm me or call me 0419848600

willing to pay more if you have to travel !

PM sent

Not real keen on the flutter hey :P

Well, not all the time. Sometimes it's good (like driving through Mt Barker around 3:30 on a school day :P ) but yeah mostly it's just annoying.

What are you doing near a school andrew....specially on a school day :dry::P

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Have you flushed the initial fluid yet? It should look like a rainbow unicorn shat glitter into it. 2nd or 3rd fluid change is when you party.
    • all brand new unit from Tomei, fluid, bearings, etc. Tomei said they call it a 1.5 lsd because its 100 percent lock up under acceleration and 50 percent under deacceleration.  as I mentioned I used their fluid, install and their break-in procedure, (alot of figure 8's) but even when driving straight, or even slowly backing out of garage for first time, (at 2 mph) then driving to and from figure 8 parking lot, each tire in the rear would sporadically grab, skip, bounce, shutter and skip, shutter back a force I could feel causing clutch to slip then grab, at any speed. shaking entire car. I removed unit, since I put stock back in and all is fine, via process of elimination, its something with the lsd unit itself. I wasn't going to beat up the entire car more or change anything else for no reason as I had a feeling something in the lsd itself was wrong as everything was fine before this alone was installed and I rechecked over everything else after first time backing out I suspected an issue. I'll probably sadly already need new tires now just from trying to drive it 5 miles and performing the figure 8 break in. but if someone has any ideas I'm all ears 
    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
×
×
  • Create New...