Jump to content
SAU Community

Recommended Posts

haha thanks :D

it has a few nicks and nacks here and there.. but little TLC and she'll be good :D

ps; i see your edit, Narh, SR20DET with T28BB ;D

if the motor dies, it will be my mission to make a 'Nissan's version of a hatchback skyline'

So that means RB25, and the plastic overface thing for the tail lights + type X lights + GTR bumper + grill + the list goes on..

but the SR20 is running very nice!

Hello everyone, long time lurker fairly new poster.

Just wanting some advice if possible. I am currently looking at purchasing a skyline and am wanting somthing mechanically sound. I have recently found a car and was wondeing if there is anywhere that does pre purchase inspections? I know of RAA etc, but have been told there knowledge of imports isnt great. I am a female without a huge amount of mechanical knowledge and I dont want to be taken for a ride.

Thankyou for your input in advance

you can buy my r33 gtst! 20k with almost everything you need unless you're more into cosmetics

i want a honda :D

NO! NO! NO! NO!!!!!!

Don't EVER mention that word on here again!!

F*cking bullshit place. My entire family has had dodgy dealings with that place, including me.

Don't EVER take ANY car there!! No matter how shit it is!!!!!!

2nd hand wheel bearings, snapping drive shafts, missing nuts... the list goes on.

Never again.

lol ok mate

I used them a while back for rebuilding the R31 driveshaft and some commo work nothing more , they have won many RAA awards for best shop in south.???

but your word is better then the BS awards.

happy customers or disgruntled ones speak volumes over some BS awards

haha, yeah i understand aboutt he cut and paste job, but all the guards are metal, its been engineered with the r32 front on so 100% legal :D

My dad is a panel beater by trade for 18 years, he said it was pretty well done (he is also a gap nazi)

:D be good to see some of your cars at one of these villis nights once the new bumper is done (satay pies FTW)

lol ok mate

I used them a while back for rebuilding the R31 driveshaft and some commo work nothing more , they have won many RAA awards for best shop in south.???

but your word is better then the BS awards.

happy customers or disgruntled ones speak volumes over some BS awards

Yep they were fantastic until Rod retired and his Son Brenton took over. When Rod was heading it, the service was fantastic and no bullshit, either.

Once Brenton stepped in, the place has gone down-hill. My wheel bearing seized on me, so I took the car in (old car) to get it replaced. 2 weeks later, bang... wheel bearing had seized on me and my drive-shaft snapped, too. Went to Rod Prime, confronted them, and Brenton admitted they had used a 2nd hand wheel bearing from U-Pull-It yet charged me full price for a brand new one!! And they even left one of the wheel nuts off!

They also fitted the wrong water pump to the car (how they did that, I'll never know) and then told me I needed a brand new gear box, even though the gear box was fine and had been rebuilt only a few months prior.

Brenton is the rudest prick you'll ever talk to. He has 0 customer service and gives you real attitude. There's plenty of others in the same boat as I'm in, ever since Brenton took over.

Yeah, that is why I went over for the Melbourne Motor Show a couple of months back - to get my new car fix and have a gander at the R35GTR and the 370Z before they officially came out.

haha, yeah i understand aboutt he cut and paste job, but all the guards are metal, its been engineered with the r32 front on so 100% legal :D

My dad is a panel beater by trade for 18 years, he said it was pretty well done (he is also a gap nazi)

:D be good to see some of your cars at one of these villis nights once the new bumper is done (satay pies FTW)

Good stuff, would love to see it IRL but I have never even managed to get my ass down to villis yet.

Dam it I want a pie now.

Yep they were fantastic until Rod retired and his Son Brenton took over. When Rod was heading it, the service was fantastic and no bullshit, either.

Once Brenton stepped in, the place has gone down-hill. My wheel bearing seized on me, so I took the car in (old car) to get it replaced. 2 weeks later, bang... wheel bearing had seized on me and my drive-shaft snapped, too. Went to Rod Prime, confronted them, and Brenton admitted they had used a 2nd hand wheel bearing from U-Pull-It yet charged me full price for a brand new one!! And they even left one of the wheel nuts off!

They also fitted the wrong water pump to the car (how they did that, I'll never know) and then told me I needed a brand new gear box, even though the gear box was fine and had been rebuilt only a few months prior.

Brenton is the rudest prick you'll ever talk to. He has 0 customer service and gives you real attitude. There's plenty of others in the same boat as I'm in, ever since Brenton took over.

gee I didnt know Rod retired , he was good with customer service

but yeah I met brenton and he is a total arrogant dickhead(should never be face to face with customers ever!!!!), didnt realize he runs it now

never mind , dont go to rod prime...lol

just put a 32 rear end on that 180 and it will look sweet as :D just messing, looks pretty nice

getting newbies coming in from all over, hell even why scandys on the forums. thought he woulda scared em off

yes i beat up on the guy alot :D

Edited by Inline 6
I want to get the f**k out of work..... I'm sooooo bored it's beyond funny!

+2 :D slow day at the office.... :[

Price on the Sil 4.3K, i dont expect that much... but 4k firm (i paid that and it was non turbo..) but there are a few issues like it needs new rear shocks, but ill give the person who buys it off me some stocks ones to put in to fix the problem.. that and i think the fuel pump is shitting its self...

Edited by AXTX
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...