Jump to content
SAU Community

Recommended Posts

also say i bought a car with no paint, how much time/cash would it take to do a matt black/cheap sh*t paint job on it??? apparently all the panels are good to go just need to get busy with the spray

supercheap auto $40 for 10 export matte black paint + 2 rolls of masking tape shall do the job...

all the talk of buying and selling houses etc....our first house we got because my missus' mum passed (rip)....pokey little house on a 1/4 acre block in o'sullivan beach....had a shed and a massive back yard.in hindsight it wouldve been nice to keep the place and just extend the house etc etc...but we were still kids basically and wanted a new house. We had no idea about the market and what to do to get more money for the house, ended up selling the house for $54,950 back 11.5 years ago. bought our next house up in woodcroft for $105k, nice sized house but small yards and no access to the back yard from the front....so we didnt stay there really long at all...we ended up buying a house around 500 meters away. This one has the 2nd biggest block on the street, with heaps of room for the kids and the dog to go apeshit, and enough room for me to have a shed..eventually....

Dan how little are you willing to spend how crap a job do you care that its is

hmmz 400 to 1k i was thinking, whatever stops the metal from rusting. going to check out and old zed going cheap with no paint. was thinking of doing a deathrace/madmax look with it :D

im getting regular abuse and sick of arriving to work in business outfits that have been rained on from a leaky dato :P

nah we don't want someone of Dan's calibre driving the finer automobile do we :D

Anyone else on facebook play that fking 'bloodlines' vampire game? Shit is bloody addictive, join my clan if you're on there - I need more ppl :P

Edited by AndrewJZX100

afternoon gents :D

All week ive been busy fitting a new bar to the 180-r32

brought the bumper from viva, prtty decent fit!! apart for a few pin prick marks here and there it came up damn good!

Although, i had to mod the reobar, fixed a few dodgy parts etcetc..

also Londsdale paints got the paint wrong, they have me a Toyota colour which uses the same paint code, BUT I traded over the paint for the 'right' colour, and turned out complete wrong! and the Toyota colour looked more correct! Talk about an OMEN

Anyways photos!

ea0ad269.jpg

4f4cf922.jpg

2c9f0e38.jpg

Oh and also got these bad boys (bbq 6 burner baby, gas heater)

8889ca64.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...