Jump to content
SAU Community

Recommended Posts

step 1 ask for advice on what mods to do to your car

step 2 take days off work, spend thousands on car in various workshops

step 3 wait till the next person complains about the mods you have done and begin from step 1 again

:( That about sums it up.

BTW got my Cooling Pro delta fin intercooler this week. Fill that big mouth in the front bar now :(

I'll stick my current Cooling Pro fmic on the silver Stagea.

Also planning that manual conversion for the black stagea in the next few months :P ... then track time!

Selling stolen phones and cronic :( thats how u afford gtrs kids

:P:(

Reminds me of when I was in year 9, I was at Marion with a bunch of mates. And a bunch of gangster guys came up to me and said "hey man, you want a mobile?" and I was like "nah" and he pulled out a old 3315 and said "$100." and I said "dude, I don't even work"

The good old days of playing Snake on a Nokia 3310/3315!

i had 3310 and droped it 3stories, cover came off but went back on and worked just fine :P

gota love the old briks. kept mine for ages, nearly got as much abuse as my dato :(

speaking of which discussions have began on possible rebuild, might start looking into doing a full restoro on it. yes ill fix the damn window and roof :( will be a longer term project after i finish uni. figure it will be good car to play with that way if i break anything it dosnt matter

Edited by Inline 6

My dad had a 5110 and I played snake on it all the time, then I had a 3310 and that was awesome, and I had an 8210 along the line aswell as a 6510 and that was a bad ass looking phone.....

...and like when the 7210/7250 came out with colour screen omg that was like sensational!

Ones Ive had that I can remember are: 5110, 3210, 3310, 8210, 2100. Some LG thing, a ZTE F850 (it was free), and some other Nokia before this one... 5100? It had 3G, 2mp camera, wifi etc. And now a Apple iPhone.

I've always liked the Motorola Razr's. My mum has had a couple of different razr's and I think they are pretty good

Edited by 93GTST
is it me or are psi boost gauges rare as hens teeth?

yes theyre rarer because they are using INCHES as the measurement and are imperial

Bar is metric and mmHG is a scientific measure.

I bought my psi VDO gauge from gaugeworks. They have several different types

-D

Wow ... I just landed an awesome job at work! (sense the sarcasm?)

Create a directory on our intranet and transfer 10 years worth of Development Plan CDs onto it. 12 CDs per year x 10 years = over 100 CDs (some months had no Development Plan editions) @ over 500MB per CD of info = massive headache. Some of the CDs are beyond their shelf life and not reading properly for the transfer. Oh goody!

:P

yeah, but its not too hard to convert bar-psi in your head.

math not ya good subject? :P thought watching for card counters you would have some skillz

real cars come with boost gauges :P and only milk n juice come in 2LT etc etc

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...