Jump to content
SAU Community

Recommended Posts

its on the CA damo! anyone got a stock CA18det sump laying around (dale) hehe..

and need urgently a Small FMIC like the jjr one.. dont have the time to wait for it to come!

Contact Smooth Garage and speak to Niko, tell him Kye sent you to him.

They would have HEAPS of CA parts laying around. Niko just finished ripping out his old CA so you might be in luck.

yeah Chris cant answer that one i would depend on the assessor on the day and all sorts of contributing factors

i was making a point that if they deem that mod to of caused the accident its highly likely they will void your insurance

Thats a genuine possibility, but generally if you have your modifications performed by an accredited mechanical workshop (and have reciepts to prove it) then you're fine.

If you've done something like welded a diff or chopped springs etc, then its very possible that they'd use those as an excuse to at least reduce the payment

Best to call the insurer in either case and see what they will and wont insure... and if they do, get it listed. Its worth paying the extra $20-50 per year if it keeps you completely covered.

-D

anyone got a plate for a stock bov wanna have some mad flutter styles yo before I leave adelaide :blush:

all you need is a coke can mate

not hard at all and i think that there is a DIY thread somewhere

goodluck and it seriously takes 5 mins if that

unbolt the bov, cut a coke can and lay it flat, so you have a sheet of metal. then trace the bov on the coke can, and the bolt holes. cut out the holes for the bolts and put the can sheet in between the bov and the flange.....and bolt it all back up nice and tight.....presto u got flutters

haha, mack trucks win!

ill be getting it dyno'd again next week, see how much i pick up with the AM pipes and hi-flow cat. extra 3 or 4 psi should net a healthy handful of killerwasps.

Edited by scandyflick
all you need is a coke can mate

not hard at all and i think that there is a DIY thread somewhere

goodluck and it seriously takes 5 mins if that

unbolt the bov, cut a coke can and lay it flat, so you have a sheet of metal. then trace the bov on the coke can, and the bolt holes. cut out the holes for the bolts and put the can sheet in between the bov and the flange.....and bolt it all back up nice and tight.....presto u got flutters

.....heads out to the garage.....

lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...