Jump to content
SAU Community

Recommended Posts

jake needs better brakes..anyone have an idea on how much dba slotted rotors cost for an r31?, i'd usually ask on the 31 forums, but the tab for sau was open so i thought i'd put it to good use for once.

jake needs better brakes..anyone have an idea on how much dba slotted rotors cost for an r31?, i'd usually ask on the 31 forums, but the tab for sau was open so i thought i'd put it to good use for once.

try here

http://www.skylinesaustralia.com/forums/Rd...ro-t251349.html

:P

I guess there are no haters on here at the moment!!

I definitely don't hate NS, but observe that the vast majority of posters 1). are under 18 years of age, and tend to show their lack of maturity in their comments and posts, and 2). the vast majority of users actually don't even own a car - yet are happy to shell out advice and opinions as though they are gospel.

SAU users used to tend to be exclusively older, as the price of the cheapest import Skyline was $30k+. However, these days I feel a large part of the deterioration of SAU is the fact that a turbo Skyline can be had for well under $10k, and this opens the forum up to a myriad of younger users, who tend to type before they think on occassion.

Another big factor is the clampdown by SAPOL on imports scaring people away from the scene, or more significantly forcing users to be much more private in their discussions of mods/cars/cruises, which makes it seem as if less goes on around here.

Just my observations.

I definitely don't hate NS, but observe that the vast majority of posters 1). are under 18 years of age, and tend to show their lack of maturity in their comments and posts, and 2). the vast majority of users actually don't even own a car - yet are happy to shell out advice and opinions as though they are gospel.

SAU users used to tend to be exclusively older, as the price of the cheapest import Skyline was $30k+. However, these days I feel a large part of the deterioration of SAU is the fact that a turbo Skyline can be had for well under $10k, and this opens the forum up to a myriad of younger users, who tend to type before they think on occassion.

Another big factor is the clampdown by SAPOL on imports scaring people away from the scene, or more significantly forcing users to be much more private in their discussions of mods/cars/cruises, which makes it seem as if less goes on around here.

Just my observations.

i agree with your observations. :P

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...