Jump to content
SAU Community

Recommended Posts

yeah i have a HKS cooler but no piping for it as it was custom shit from my gtr motor , im getting a oil cooler eventually aswell

just need to get out there sliding asap !

Rush into it and you'll have another blown motor

Signed up another bunch of members tonight. New membership cards are coming to all SAU:SA members.

And a heads up ... get in quick because the next two membership numbers are #0033 and #0034 :D

(#0035 is already taken ... I had my arm twisted by "he who waves the ban stick")

Signed up another bunch of members tonight. New membership cards are coming to all SAU:SA members.

And a heads up ... get in quick because the next two membership numbers are #0033 and #0034 :D

(#0035 is already taken ... I had my arm twisted by "he who waves the ban stick")

Hmmmmmm, do i want #0033...how much is membership?

Hmmmmmm, do i want #0033...how much is membership?

Membership is $30 per year + $15 once off admin charge = $45 (plus +$5 for associate member card for partner).

:D

nah for the 34, gonna shove that on for a grip session when i get everything sorted. 31 would need a bit of work to be track ready, and since im keeping the 34, gonna have a few fun laps in it :D

be a pal, you can buy some coilovers for the 33 while youre there. :D

I wish! Don't know whether to go for a FMIC first or suspension. All too hard cause I don't want to cut reo and cop a defect either!!!

I got to go speak to a suspension expert about lowering my car because I definitely don't want a harsh ride, being a daily driver. If I can get it 25-30mm lower with spring rates very similar to what they are now and of course correct camber I'll be happy.... don't really think it needs to be any lower than that.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...