Jump to content
SAU Community

Recommended Posts

Abe, place the pump in the exact same position as your stock one. Make sure the bottom of it is inline with the stock one. Looks like u will need to cut the hose alittle shorter and connect that up. Cutting the bottom bracket off is fine as u need to. After that hose clamp it on and slide it into place.

I am slowly getting there with the pump.

I finally stuck my whole arm in there and managed to get the pump into position, that was with out hose clamping it to the cradle. I have now hose clamped it, cut the tail off...just waiting for it to stop raining, while having lunch.

Also, petrol melts the sound deadening in the Tyre well.

mitch, i dont think a 26 head gasket will go on a 25, they have different oil lines

the gaskets will be the same appart from that the 26 will have larger holes where that head studs. The proof is that with 25-26/30 conversions both the 25 and 26 head will fit the 30 block without modifications.

the gaskets will be the same appart from that the 26 will have larger holes where that head studs. The proof is that with 25-26/30 conversions both the 25 and 26 head will fit the 30 block without modifications.

i wasen't quite sure, because the 26 has an oil feed to the head blocked off where as the 25 keeps it (for vvc)... so wasent sure if the head gasket for the 26 still has the hole for the blocked off feed or not hence played it on the safe side. Tho isn't the hole a different shape on the 25, smaller and tear drop shaped? but probably wouldnt matter since the 26 hole would once again be larger...

need the chains coming off the back now so u dont run them over.

thats the next bit im working on, definitely going to need them when i do the fronts thats for sure

lol. plenty of 'otherwise inclined gentlemen' in adelaide. (i got majorly chewed out and refused service from the ex lady for refering to a fag as something rather crude today, lol)

most of them hang at hq on wednesday nights. makes it real easy to throw some moves on the rather large amount of easy ladies that frequent slash dance.

needs more twink reference haha

hmm... just found the same set of wheels i want (albeit in a different colour, and without tyres) brand new for $90 more than i was gonna pay for use ones... really not a fan of the colour though...

was just reading a thread on ns.com

1800 defects in the last 8 days!! hahaha WTF!

would like to know what suburbs this is happening in!

i know the west subs have cops galore!

You said they said they heard? NS.com is hardly a reliable source. :down:

I have a soft spot for Capellas lol,

So badly want something old school Mazda with a 13bt in it.

newpellazc3.jpg

capella1.jpg

Or a ke10 with a 13BT

ke10black2.jpg

ke10black3.jpg

Faaark yeah the 200m powerskids would be awesome

Edited by Weezy

Many years ago, I helped a mate fit a 12A into a KE10! Last I saw of that project he was getting it wired up. Don't know how far he got. But even a 12A in something as small as that would have been fun!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...