Jump to content
SAU Community

Recommended Posts

Bloody hell Luke. That was hella quick. I would still be sulking and my thumb wouldn't have left my mouth yet to even pick up a spanner (or a phone in my case).

Good luck. I hope you get through 1st time.

spent the last couple hours stuffing around with a very old school pentax mv1 (1980). its rather amusing. forgotten how heavy these motherf**kers are. got a random collection of fixed focal lenses, telephoto zoom lenses and such. think i might have to buy some more film and some batteries tomorrow. i like it. even being such a heavy mofo...

... i think i need a dark room.

Edited by scandyflick

I'm runnin twin HKS pods because thats what came with my car lol - so for that reason and that reason only I'll stick with them just chase down some new elements, anyone know where they're sold at a decent price?

on the plus side, standard airbox will keep the boys in blue happy, and you can still run a bit of power through them. im pretty sure Cubes was running around 300rwkw with a standard airbox?

damn posers :P remember if you get pods they need to be secured to something or its defect

i stick with the hks's also cause they come with the car. stock is better cause its enclosed and keeps the engine heat away, you can ofcourse build your own lil enclosure for the pods if you handy with that sort of thing.

Edited by Inline 6
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
×
×
  • Create New...