Jump to content
SAU Community

Recommended Posts

Has anyone changed the dash globes on a 32??? I have brought blue LED ones and was just wondering how long they take to fit???? might try and fit them today :D

took me around 3 hrs the first time I did it, 2 hrs the second time... also stripped my dash out yesterday which took 3 hrs to disassemble and around 2hrs to get 1/2 of it back on... its not too hard but if u have problems, send me a tell. worst comes to worst u can buy me booze and I'll do it for ya ;P

-D

anyone know when changing gearbox oil do you need to replace the filler and drain plug with new ones?

thanks Luke

dont need to replace the plugs unless the old ones are shagged. if still in good nick just clean the magnet and plug.

thanks to damo and chad about the jobi congrats. means alot! im scared as hell, start tomorrow working for a company called maison design as an all rounder.... called up friday, interview saturday, trial monday!! haha awesome!

http://maisondesign.com.au/

lol @ dohmar's lack of dash! looks hectic!

chad! we want pics!! :( havin fun getting intimate with your cluster?

hahaha yeah i know!! every little thing possible should be done in the first week to impress the boss! haha

thanks for well wishes! all helping me to amp up for the big day...... sorta like a dream place to be working

just got my dash led's working again steve...

i by-passed the dimmer knob (soldered the wires together)

and noticed there were still 2 not working, i mucked around with them switching them around, and now they all work!

its been a while since i have seen that!

i did notice one of the led's had melted though :(

meh, it still works, i just ordered white ones lol

Well I've got a bit of a head ache at the moment. I sold a diff to one of my mates and I shimmed it up and fitted it today, and after I had it in I was positioning it to line the bolt holes up and it fell out onto my head. For those who have picked up an R200 they would know they aren't that light.

So now i have an egg on my forehead the size of an actual egg.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...