Jump to content
SAU Community

Recommended Posts

sorry for possible thread hijack but.. I also Have R34 GTT with Apexi PFC (Standard not PRO - so no spark cut or 2 stage launch control)

I am interested in getting a *Bee-R mostly for 2-stage and the 'hektic sounds' :whistling: but i have some concern over possible engine damage :s

sorry for possible thread hijack but.. I also Have R34 GTT with Apexi PFC (Standard not PRO - so no spark cut or 2 stage launch control)

I am interested in getting a *Bee-R mostly for 2-stage and the 'hektic sounds' :whistling: but i have some concern over possible engine damage :s

Hektic sounds are great. Throwing a rod is not. What do you want more, a running engine? Or some flames to impress your mates.

I feel that its different in the smallest way. But I feel what peopel are saying is to do is to just have flames and a loud bang bang sound doesn't make sense. It will kill the motor really fast. Anti lag systems depending on what kind will kill the motor faster and I can sit here and list a few parts that will surely fail. But real question at hand, is it worth it.? Ill be doing a anti lag system soon and surly not for the sound. Put it simple I want to win a prize next year and just forking out the cash would be easy to do, but the challenge is using a car to win the prize. Its more than just a tangible prize though.

In short I do agree that these devices speed up the destruction of the vehicle's engine. I hope its worth it.

Oh I remember the old days of piggy backs before it took me years to learn just to get a new ecu that can do it. Lol. I never thought it would be this beneficial. All the other stuff was just a bonus.

Edited by MJTru

I don't know if power fc uses ignition cut.

My response was in regards to the post above mine where it was said, how one can be safe and the other not.

Ignition cut is hektik and makes more than your exhaust go bang.

Fuel cut generally speaking better for the motor.

I don't know if power fc uses ignition cut.

My response was in regards to the post above mine where it was said, how one can be safe and the other not.

Ignition cut is hektik and makes more than your exhaust go bang.

Fuel cut generally speaking better for the motor.

Power FC uses fuel cut, Power FC PRO uses ignition cut.

The way i understand fuel cut can cause lean condition but ignition cut can damage turbo and exhaust system.

Is cutting both a better idea for rev limiter? (Obviously no good for launch control) or would it be a very harsh power cut?

The way i understand fuel cut can cause lean condition

I don't understand how this can be the case.. petrol has a very narrow window of air/fuel mix where it will ignite. if you are leaner than say 17:1 then it will not fire. fuel cut cuts ALL fuel. The only way you could get fuel into the combustion chamber is if it were left over from the previous combustion event. pretty unlikely to be enough fuel to make a flammable mix. when an ECU cuts fuel to a cylinder it needs to decide before opening the injector, it would be pretty f**king stupid for an ecu manufacturer to put out an ECU that decided to stop fuel delivery mid-injection.

also, ignition cut and antilag are different things.

I don't know if power fc uses ignition cut.

My response was in regards to the post above mine where it was said, how one can be safe and the other not.

Ignition cut is hektik and makes more than your exhaust go bang.

Fuel cut generally speaking better for the motor.

I like how people try to promote the Bee-r ignition cut system by saying its better for the engine to run overly rich than lean. As if somehow running lean for a fraction of a split second during fuel cut is worse than the massive shockwave ignition cut causes. Its practically a nuke version of detonation.

Edited by Touring

I never really set out to agree or disagree with you :)

But I think the bottom like here is the type of people who want the bee-r system only want it for the mad props effect. They don't really care about their car and are only in it to show off popping fire in front of girls, if the car dies then it dies and they move on to the next car they will abuse.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...