Jump to content
SAU Community

Hiclone - ? - Another Myth To Grab Average Car People? Snake Oil?


Recommended Posts

I'm assuming this is just like all the other 'Gain power now, save fuel..'

http://www.fuelsaver.com.au/hiclone.php

Thoughts?

After looking through the web site, it all feels like rubbish, but......

From web site....

Turbo Engines

For Turbo vehicles we suggest installing Hiclones in two locations.

The first Hiclone is installed near the intake manifold; after the Turbo or intercooler; to improve combustion and economy.

The second part is installed near the air filter, before the Turbo. This part helps the Turbo Impellor to spin, reducing Turbo lag, bringing the boost in around 400-500rpm earlier.

It is also possible to install extra Hiclones in power or economy positions to further improve the vehicle. We have a lot of customers with up to 6 Hiclones installed on one vehicle.

Please note the line - AFTER THE Turbo ??!!!

Edited by Zebbie

I read an article a little while ago where they tested a bunch of these power enhancing/fuel saving type devices in a stock car on a dyno, and the best you could hope is that they did nothing, most of them restricted some power and one even set the test car on fire :)

surely you jest?!?! I mean look at the fking thing. and the diagrams... ooooh swirling air.... just get out a $100 note and set it on fire. you will get all of the benefits of a hi-con with the potential for engine damage.

i've bought a new RB20E long and i'm building it up to run quad hiclones... should run 9's all day

Edited by joeyjoejoejuniorshabadoo

This is my favourite quote from their website:

The ECU will need time to re-learn (about a week) this is why dyno shops who test products by doing one run without, and one run with any product don't know how to use a dyno on an EFI car.

So basically they are saying everytime you do back to back dyno tests you are wrong, and thats why no one has proof their product actually works.

Utter BS

This is my favourite quote from their website:

The ECU will need time to re-learn (about a week) this is why dyno shops who test products by doing one run without, and one run with any product don't know how to use a dyno on an EFI car.

So basically they are saying everytime you do back to back dyno tests you are wrong, and thats why no one has proof their product actually works.

Utter BS

anything to make a dollah!

I read an article a little while ago where they tested a bunch of these power enhancing/fuel saving type devices in a stock car on a dyno, and the best you could hope is that they did nothing, most of them restricted some power and one even set the test car on fire :D

:w00t:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...